Our Double Flashbang pouch is made of high quality tactical nylon that exceeds Mil-Spec requirements. Carries two 40 mm HE, HEDP, Smoke or special purpose rounds or two MK141 (or similar sized) flash bangs The Chase Tactical Double Adjustable 40 mm Ordnance/FlashBang Pouch attaches upright with MOLLE and is designed to carry two 40 mm HE, HEDP, Smoke or special purpose rounds or two MK141 (or similar sized) flash bangs.  Features a quick release buckle strap to keep your ordnance accessible yet secure and an adjustable strap to increase or decrease the strap height. Features: Carries two 40mm HE, HEDP, Smoke or special purpose rounds or two MK141 (or similar sized) flash bangs Hook / Loop / Snap flap Available in single, double, and triple configuration High strength bar tacked construction Exceeds Mil-Spec requirements

Chase Tactical’s DOS Modular Plate Carrier was designed with direct input from the U.S. Dept. of State as a lightweight modular plate carrier that works with any set of hard armor plates and soft armor backers. The DOS plate carrier accepts full-size plates, up to 10″ x 13″ front and back and features a highly mobile cut with built in padded and fully adjustable shoulder straps.  The front and rear pockets, both shoulders, and cummerbund are fully adjustable. Spacer mesh is used on the inside of the DOS Modular Plate Carrier for increased breathability and comfortable fit. Matching hook & loop covers the upper front and back portions of the carrier for any size hook & loop placards. The DOS Modular Plate Carrier features built in side armor pockets on the interior of the cummerbund will fit side plates up to 6″ x 8″, as well as the cummerbund will accept soft armor up to 5.5″ x 15″. DOS Modular Plate Carrier Key Features: Accepts front-and-back plates up to 10″ x 13″ Accepts side plates up to 6″ x 8″ Cummerbund accepts soft armor up to 5.5″ x 15″ Fully adjustable & padded shoulder straps TAA Compliant Spacer mesh for comfort & breathability Large Hook & Loop area for placards Easy access to ballistic plates with pull down flaps One front map pocket with snap, hook-and-loop closure Side-release buckles on shoulders and internal waist strap All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: Fit Sizes: S – XL adjustable

Chase Tactical Double 5.56 Mag Pouch holds two 5.56 mags in a compact side by side panel configuration.  Two compartment pouches utilize a bungee retention system, securing the magazine until needed.  Bungee retention tabs made of hypalon for maximum grip when pulled, reliable, secure and highly effective.  Compatible with all MOLLE/modular webbed systems.  The outer layer is constructed from beefy 500 weight solution dyed Cordura®, fabric that improves and softens with time and wear, allowing it very durable without being heavy.  Reverse stitching is used wherever possible to enhance durability.  As with most high-quality items, it gets better with age.  As always, it’s the attention to detail that determines quality.  Made from genuine U.S. Mil-Spec made materials.  Chase Tactical products are backed by our lifetime limited warranty and meant to be abused. Features Holds two 5.56 mags Bungee retention tabs made of Hypalon Compatible with all MOLLE/modular webbed systems Made of 500D Cordura Made from genuine U.S. Mil-Spec made materials Chase Tactical products are backed by our lifetime limited warranty and meant to be abused

The Chase Tactical Double Pistol Mag Pouch, is compact and allows the cover flap to be rolled down and secured with hook & loop, allowing fast access to mags. The Chase Tactical Double Pistol Magazine Pouch is a versatile and durable solution for carrying extra ammunition. Designed to fit most double stack pistol magazines, this pouch is made from high-quality materials to ensure long-lasting use.The open-top design with adjustable retention straps allows for quick and easy access to your magazines, while the MOLLE compatibility enables you to attach it to any compatible gear or platform. With its compact size and sturdy construction, the Chase Tactical Double Pistol Mag Pouch is perfect for military and law enforcement personnel, as well as civilian gun enthusiasts looking for a reliable and convenient way to carry their extra ammunition. Mags pictured not included.

The Chase Tactical Admin Folding Admin MOLLE Pouch is designed to carry your small mission essentials in a compact flat pouch. The MOLLE pouch folds open making it easier to see into the pouch and access its contents. There is a small zippered pouch inside, as well as small tie down points for keeping critical items secure. 2 internal pen slots. Tactical Folding Admin Pouch Key Features: Folds down for easier access Large Velcro® area for unit, flag & IR patches Internal tie down points 2 internal pen slots Zippered mesh compartment Matching Velcro® Weight: 0.25 LBS

Chase Tactical Individual First Aid (IFAK) Pouch The Chase Tactical IFAK pouch is a compact first aid kit pouch that allows you to carry a basic bleeder blow-out trauma kit: Features: Designed to hold Combat Gauze, Tourniquet Trauma Bandage, and medical shears for immediate access Features a quick pull interior strap for easy one-handed removal of contents Equipped with additional external webbing on both sides for attaching extra items like tourniquets and glow sticks Includes a dedicated rear slot for storing medical shears, secured by a strap and snap Main pouch utilizes a quick-pull interior strap for convenient access Flap design allows engagement with a side release buckle, hook and loop closure, or both for added security Velcro square on the flap for attaching a First Aid patch Features a grommet on the bottom for drainage to keep your gear dry Specifications: Height: 7" Width: 4" Depth: 3" ***MEDICAL ITEMS NOT INCLUDED***

The Chase Tactical JOEY utility Pouch hangs under the front flap of most plate carriers and attaches quickly and securely via Velcro (Velcro Loop to the frontside and Velcro Hook on the backside). There are 2 zip pockets, the larger and main compartment is designed for storage and quick access of larger accessories or medical items. The smaller pocket is good for storage of smaller items such as flashlights, batteries, etc. On the underside there are 2 elastic loops for chem lights and or markers. The JOEY Utility Pouch can also be used as an armor add-on for lower abdomen protection, we have included a rear pocket which allows for the Chase Tactical SA3100 or 3A300 Level IIIA JOEY soft armor insert to be added.  The front of the Joey utility Pouch has 3 rows, each comprising 4 loops of MOLLE webbing with Velcro loop sewn on.  This allows the attachment of other small pouches and or call sign and insignia patches.  Made from Genuine U.S. Mil-Spec materials. Features 2 Zipper pockets in the front 1 Zipper pocket in the rear which will accept Level IIIA Soft Armor 2 Elastic loops on the bottom for chem lights Attaches securely to plate carriers with Velcro flap Hook & Loop MOLLE webbing on front U.S. Mil-Spec IR Treated material All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Level IIIA Armor Sold Separately

The ultimate protection, breathability, and comfort with the Lightweight Operational Plate Carrier (LOPC)  Designed by U.S. Veterans. The Chase Tactical Lightweight Operational Plate Carrier (LOPC) is a lightweight plate carrier that works with any set of hard armor plates and soft armor backers. The LOPC has built-in padded and fully adjustable shoulder straps. The tops of the shoulder straps have both nylon webbing and elastic webbing for mounting and routing tourniquets, hydration tubes, radio antennas, handsets, comm wires, V Lites, and strobe lights.  The front of the Chase Tactical Lightweight Operational Plate Carrier incorporates a large matching Velcro loop area for placards and 2 vertical clips which will accept a variety of preconfigured weapon-specific pouch panels.  The LOPC comes standard with a removable MOLLE clip placard held in place by 2 vertical clips. Spacer mesh is used on the inside of the LOPC for increased breathability and comfort. The cummerbund is made of lightweight breathable mesh with MOLLE webbing on the exterior and interior. Strong drag handle that Velcro’s down and out of the way when not in use. Key Features: Removable cummerbund with Mil-Spec Velcro Lightweight breathable cummerbund with MOLLE webbing on the exterior and interior. Vertical Clips for rapid add/removal of auxiliary chest worn equipment Comes standard with a removable MOLLE clip placard Interchangeable cummerbund system Fully adjustable & padded shoulder straps Spacer mesh for comfort & breathability Strong drag handle that Velcro’s down Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical LOPC Active Shooter Kit is a cost-effective solution for active shooter preparation and response. This kit provides protection against both handgun and rifle rounds. Kit Components Chase Tactical LOPC Plate Carrier x 1 Chase Tactical AR1000 Level III+ 10 x 12 Hard Armor Shooter Cut Plates x 2 Chase Tactical Lightweight Operational Plate Carrier (LOPC) The LOPC is a lightweight plate carrier that works with any set of hard armor plates and soft armor backers.  The LOPC has built-in padded and fully adjustable shoulder straps. The tops of the shoulder straps have both nylon webbing and elastic webbing for mounting and routing tourniquets, hydration tubes, radio antennas, handsets, comm wires, V Lites, and strobe lights.  The front incorporates a large matching Velcro loop area for placards and 2 vertical clips which will accept a variety of preconfigured weapon-specific pouch panels. The LOPC comes standard with a removable MOLLE clip placard held in place by 2 vertical clips.  Spacer mesh is used on the inside of the LOPC for increased breathability and comfort.  The cummerbund is made of lightweight breathable mesh with MOLLE webbing on the exterior and interior.  Strong drag handle that Velcro’s down and out of the way when not in use. Key Features: Removable cummerbund with Mil-Spec Velcro Lightweight breathable cummerbund with MOLLE webbing on the exterior and interior. Vertical Clips for rapid add/removal of auxiliary chest-worn equipment Comes standard with a removable MOLLE clip placard Interchangeable cummerbund system Fully adjustable & padded shoulder straps Spacer mesh for comfort & breathability Strong drag handle that Velcro’s down Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Chase Tactical AR1000 Level III+ Stand Alone Rifle Plate NIJ 0101.06 Compliant (RHINO EXTREME COATING) The Chase Tactical AR1000 Rhino eXtreme is an all-steel based Advanced Armox Steel / MIL46100 compliant product with an upgraded base coat spall liner.  Unlike other AR500 Steel armor plates available on the market, the CT-AR1000 plate is the first to receive NIJ 0101.06 Compliance and is also DEA Compliant so you can purchase with confidence.  It is designed to be a thin, low profile, economical armor solution for law enforcement and military personnel. Protection: Level III+ Stand Alone High-Velocity Rifle Rounds NIJ Standard 0101.06: This product is compliant to NIJ 0101.06 DEA: Hard Armor Protocol Compliant RST: Rifle Special Threats Validated Material: Advanced Armox Steel Exterior Cover: 1000D Cordura®, Textured Nylon Upgrade Finish: Polyurea ballistic fragment spall and blast coating Rhino Extreme 11-50 FR DEA Compliant Threats: M80 ball, M43 MSC PS, SS109/M855, .223 REM Thinness: .35” Weight: 5.9 Lbs. Cut: The 10” x 12” shooters cut plates are considered nominal and the actual measurement is 9.5” x 11.5” Warranty: 10 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship Disclaimer: Text shown on strike face is for marketing purposes only. The actual labels on Chase Tactical products are NIJ approved self-adhesive labels. MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT.  Armor could take 2-3 Weeks for shipment.

The LVPC is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporates 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Velcro 2 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical Low-Vis Plate Carrier M1 (LVPC-M1) The LVPC-M1 is a combination of our Low-Vis Plate Carrier and our Triple 5.56 Velcro Mag Pouch.  The LVPC-M1 is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporates 2 internal pouches on each side which can hold mag pouches, tourniquets and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Velcro Removable Triple Velcro 5.56 Mag Pouch 2 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

Low Profile & High Protection with the Low-Vis Plate Carrier Elite (LVPC-E) by Chase Tactical The Low-Vis Plate Carrier Elite (LVPC-E) was designed with direct feedback from our customers asking for features of our original LVPC with features from our very popular SOCC plate carrier.  The LVPC-E is a low-profile, slick plate carrier built for Low Visibility and concealment. It is fully adjustable on the shoulders for size, and the sides are made from double layer Mil-Spec elastic. The Low-Vis Plate Carrier Elite (LVPC-E) also incorporates 3 internal pouches on each side which can hold rifle magazines, tourniquets, and/or radios. The sides of our Low-Visibility Plate Carrier are fully adjustable for girth by way of Velcro closure.  The interior of the LVPC-E has moisture wicking spacer mesh adding additional comfort to the body when worn.  The front of the LVPC-E incorporates a large Velcro area for placards and 2 vertical clips which will accept a variety of pre-configured weapon-specific pouch panels. Chase Tactical Low-Visibility Plate Carrier Elite (LVPC-E) Key Features: Removable cummerbund with Double Layer Mil-Spec Elastic 3 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Vertical Clips for rapid add/removal of auxiliary chest worn equipment Front/Rear interior moisture wicking spacer mesh Made with Mil-Spec IR Treated 500D Cordura All our Fabrics are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical LVPC Active Shooter Kit is a cost-effective solution for active shooter preparation and response. This kit provides protection against both handgun and rifle rounds. Kit Components Chase Tactical LVPC Plate Carrier x 1 Chase Tactical AR1000 Level III+ 10 x 12 Hard Armor Shooter Cut Plates x 2 The Chase Tactical Low-Vis Plate Carrier (LVPC) The LVPC is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporates 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Velcro 2 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Chase Tactical AR1000 Level III+ Stand Alone Rifle Plate NIJ 0101.06 Compliant (RHINO EXTREME COATING) The Chase Tactical AR1000 Rhino eXtreme is an all-steel based Advanced Armox Steel / MIL46100 compliant product with an upgraded base coat spall liner.  Unlike other AR500 Steel armor plates available on the market, the CT-AR1000 plate is the first to receive NIJ 0101.06 Compliance and is also DEA Compliant so you can purchase with confidence.  It is designed to be a thin, low profile, economical armor solution for law enforcement and military personnel. Protection: Level III+ Stand Alone High-Velocity Rifle Rounds NIJ Standard 0101.06: This product is compliant to NIJ 0101.06 DEA: Hard Armor Protocol Compliant RST: Rifle Special Threats Validated Material: Advanced Armox Steel Exterior Cover: 1000D Cordura®, Textured Nylon Upgrade Finish: Polyurea ballistic fragment spall and blast coating Rhino Extreme 11-50 FR DEA Compliant Threats: M80 ball, M43 MSC PS, SS109/M855, .223 REM Thinness: .35” Weight: 5.9 Lbs. Cut: The 10” x 12” shooters cut plates are considered nominal and the actual measurement is 9.5” x 11.5” Warranty: 10 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship Disclaimer: Text shown on strike face is for marketing purposes only. The actual labels on Chase Tactical products are NIJ approved self-adhesive labels. MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT.  Armor could take 2-3 Weeks for shipment.

The Chase Tactical LVPC Active Shooter Kit is a cost-effective solution for active shooter preparation and response. This kit provides protection against handgun rounds. Kit Components Chase Tactical LVPC Plate Carrier x 1 Chase Tactical SA3100 Level IIIA 10 x 12 Soft Armor Shooter Cut x 2 The Chase Tactical Low-Vis Plate Carrier (LVPC) The LVPC is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporate 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Velcro 2 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Chase Tactical LVPC Level IIIA Soft Armor (SA3100) The Chase Tactical SA3100 Level IIIA LVPC Soft Armor is specifically designed for the Chase Tactical Low Vis Plate Carrier (LVPC) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.75″ x 12.50″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.32 psf (6.44kg/sqm) Thinness: 0.287” Material: Enhanced blend of woven and unidirectional aramid fibers Multi-hit capabilities Sonobond Sealed rip stop water-resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT.  Armor could take 2-3 Weeks for shipment.

The Chase Tactical 3A300 Level IIIA LVPC Soft Armor is specifically designed for the Chase Tactical Low Vis Plate Carrier (LVPC) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.75″ x 12.50″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 2-3 Weeks for shipment.

The Chase Tactical LVPC Active Shooter Kit is a cost-effective solution for active shooter preparation and response. This kit provides protection against handgun rounds. Kit Components Chase Tactical LVPC-EPlate Carrier x 1 Chase Tactical SA3100 Level IIIA 10 x 12 Soft Armor Shooter Cut x 2 The Chase Tactical Low-Vis Plate Carrier-Elite  (LVPC-E) The LVPC is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporate 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Elastic 3 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Hook & Loop area for placards Vertical Clips for rapid add/removal of auxiliary chest worn equipment Front/Rear interior moisture wicking spacer mesh Made with Mil-Spec IR Treated 500D Cordura All our Fabrics are treated at source to deliver the lowest I.R. Signature possible. Chase Tactical LVPC Level IIIA Soft Armor (SA3100) The Chase Tactical SA3100 Level IIIA LVPC-E Soft Armor is specifically designed for the Chase Tactical Low Vis Plate Carrier (LVPC-E) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.75″ x 12.50″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.32 psf (6.44kg/sqm) Thinness: 0.287” Material: Enhanced blend of woven and unidirectional aramid fibers Multi-hit capabilities Sonobond Sealed rip stop water-resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT.  Armor could take 2-3 Weeks for shipment.

The Chase Tactical 3A300 Level IIIA MEAC Soft Armor is specifically designed for the Chase Tactical MEAC Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.50″ x 11.50″ SAPI style and Cummerbund Armor comes in a set of  or Large 5.50″ x 13.50″. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 4-5 Weeks for shipment.

Chase Tactical Medical Trauma Shear Pouch The Chase Tactical Medical Trauma Shear Pouch is a simple solution for securely carrying your essential medical trauma shears on your bag, pack, or vest. Crafted with a MOLLE backed design, this pouch offers a sleek and minimalist approach to organizing your gear. Main Features: Secure & Ready: Designed for quick deployment in critical situations, ensuring your shears are always within reach when needed. Deliberate Deployment: Equipped with a retention strap secured by a standard button snap for precise and intentional access to your shears. Universal Compatibility: Fits any standard 7.5-inch trauma shears, providing a versatile solution for medical professionals. Multi-Functional: Not limited to shears, it can also accommodate hand tools, pens, and other essentials for added convenience. MOLLE System: Easily attachable to various gear including belts, waist packs, backpacks, plate carriers, and chest rigs for customized organization. Specifications: Material: Made of durable 500D Cordura for long-lasting performance. Dimensions: Compact size measuring 2" x 4.75", perfect for a slim-lined addition to your kit.

The ultimate protection, breathability, and comfort with the Lightweight Operational Plate Carrier (LOPC)  Designed by U.S. Veterans. The Chase Tactical Lightweight Operational Plate Carrier (LOPC) is a lightweight plate carrier that works with any set of hard armor plates and soft armor backers. The LOPC has built-in padded and fully adjustable shoulder straps. The tops of the shoulder straps have both nylon webbing and elastic webbing for mounting and routing tourniquets, hydration tubes, radio antennas, handsets, comm wires, V Lites, and strobe lights.  The front of the Chase Tactical Lightweight Operational Plate Carrier incorporates a large matching Velcro loop area for placards and 2 vertical clips which will accept a variety of preconfigured weapon-specific pouch panels.  The LOPC comes standard with a removable MOLLE clip placard held in place by 2 vertical clips. Spacer mesh is used on the inside of the LOPC for increased breathability and comfort. The cummerbund is made of lightweight breathable mesh with MOLLE webbing on the exterior and interior. Strong drag handle that Velcro’s down and out of the way when not in use. Key Features: Removable cummerbund with Mil-Spec Velcro Lightweight breathable cummerbund with MOLLE webbing on the exterior and interior. Vertical Clips for rapid add/removal of auxiliary chest worn equipment Comes standard with a removable MOLLE clip placard Interchangeable cummerbund system Fully adjustable & padded shoulder straps Spacer mesh for comfort & breathability Strong drag handle that Velcro’s down Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical Quick Response Carrier (QRC) was developed as a minimalistic no thrills, no frills plate carrier that is lightweight, functional and robust. When worn with ballistic inserts, the QRC can be quickly donned for rapid action response to high threat scenarios such as Active Shooter, Entries, Home Defense, or other critical incidents. Key Features: Adjustable 2″ Wide Shoulder Straps Adjustable 2″ Waist Strap with Quick Release Buckles Front & Back 4″x8″ Color Matched Velcro Area for ID Placards Strong drag handle that Velcro’s down Bottom Load Armor with an Internal Stirrup to Adjust Height Front & Rear MOLLE Webbing Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical Quick Response Carrier (QRC) was developed as a minimalistic no thrills, no frills plate carrier that is lightweight, functional and robust. When worn with ballistic inserts, the QRC can be quickly donned for rapid action response to high threat scenarios such as Active Shooter, Entries, Home Defense, or other critical incidents. Key Features: Adjustable 2″ Wide Shoulder Straps Adjustable 2″ Waist Strap with Quick Release Buckles Front & Back 4″x8″ Color Matched Velcro Area for ID Placards Strong drag handle that Velcro’s down Bottom Load Armor with an Internal Stirrup to Adjust Height Front & Rear MOLLE Webbing Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

One compartment pouch utilizes a bungee retention system, securing the magazine until needed.  Bungee retention tabs made of hypalon for maximum grip when pulled, reliable, secure and highly effective.  Compatible with all MOLLE/modular webbed systems.  The outer layer is constructed from beefy 500 weight solution dyed Cordura®, fabric that improves and softens with time and wear, allowing it very durable without being heavy. Reverse stitching is used wherever possible to enhance durability.  As with most high-quality items, it gets better with age.  As always, it’s the attention to detail that determines quality.  Made from genuine U.S. Mil-Spec made materials.  Chase Tactical products are backed by our lifetime limited warranty and meant to be abused. Single 5.56 Mag Pouch Features: Holds one 5.56 mag Bungee retention tabs made of Hypalon Compatible with all MOLLE/modular webbed systems Made of 500D Cordura Made from genuine U.S. Mil-Spec made materials Chase Tactical products are backed by our lifetime limited warranty and meant to be abused

This 5.56mm +  Shotgun Strip Magazine Pouch offers a lightweight solution for military personnel, law enforcement and combat training. Available in black, coyote tan, ranger green and multicam colors. The Chase Tactical Single Open 5.56mm with shotgun strip has an elastic retention for fast, smooth mag changes it is low profile and includes space for 5 rounds of 12 gauge shotgun shells / CS Marker rounds etc. This Chase Tactical Shotgun Strip Mag Pouch offers a lightweight solution for military personnel, law enforcement and combat training. The low-profile design of this Single Kangaroo 5.56 Pistol Mag Pouch offers ample space for one 5.56mm x 45mm M4-style metal or polymer magazine. Accommodate varying size mags with this pistol mag pouch that features internal adjustments for height and a main compartment with a Velcro lid and bungee retention.

The Chase Tactical single 7.62mm Open Magazine Pouch is a great universal open 7.62 Mag Pouch which can hold a single SCAR H (7.62mm x 51mm) Magazine. It can also hold a mag for an SR25, G3, H&K 417 or M14.   The pouch attaches to your system with upright MOLLE and measures 3.75” H x 3.5” W x 1” D Mags pictured not included.

Chase Tactical Single Kangaroo Mag Pouch for 5.56 mm + Pistol holds 1x 5.56mm x 45mm M4 style metal or polymer mags. (NOT G36 mags) + a pistol magazine. The main compartment is accessed via bungee retention with the front pistol mag pouch being accessed via a hook & loop, this has internal adjustments for height to accommodate varying size mags. This Single Kangaroo Mag Pouch 5.56mm is a versatile and efficient solution for carrying your essential ammunition. Designed by Chase Tactical, a leading provider of tactical gear, this mag pouch is built to withstand the rigors of demanding environments and provide reliable performance in the field. Constructed from durable 500D Cordura nylon, the Single Kangaroo Mag Pouch 5.56 is made to last. The Cordura material is resistant to abrasion, tearing, and water, ensuring that your magazines are protected from the elements and harsh conditions. The reinforced stitching and bartack reinforcements add further durability to the pouch, making it suitable for rugged outdoor use, tactical operations, and training exercises. The innovative design of the Single Kangaroo Mag Pouch 5.56 allows for convenient and easy access to your magazines. It features a unique kangaroo-style pouch configuration that combines a pistol magazine pouch with an integrated rifle magazine pouch. This means you can carry both your pistol and rifle magazines in one compact and streamlined pouch, reducing the need for multiple pouches on your gear and keeping your magazines organized and within reach.

Chase Tactical Single Pistol Magazine Pouch is compact and allows the cover flap to be rolled down and secured with Velcro fixing to allow fast access to magazines.

The Chase Tactical Level IIIA SOCC Soft Armor is specifically designed for the Chase Tactical Special Operations Concealable Carrier (SOCC) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backers comes in a set of (2) 10″ x 12″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 1-2 Weeks for shipment.

Lightweight ballistic protection with the Striker ACH Level IIIA High Cut Ballistic Helmet by Chase Tactical Designed in the U.S.A. by U.S. Veterans The Striker ACH Level IIIA Ballistic Helmet is an Advanced Combat Helmet (ACH) designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition and Frag protection according to Mil­Std 662f. The Chase Tactical Striker ACHHC: Advanced Combat Helmet Level IIIA High Cut Ballistic Helmet Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil­Std 662f NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory Materials Including: Kevlar® fibers and thermoset resin shell construction Head protection:  Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 4 pt H Harness Padding: D3O TRUST 7 Pad helmet system Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 3 Weeks for shipment.

Level IIIA Ballistic Protection with the Striker Advanced Combat Helmet (ACH)   The Chase Tactical Stricker Level IIIA Standard Cut ACH Helmet is designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition. The harness assembly consist of the ACH Comfipad suspension system and a four point harness with a nape pad and leather lined chin strap. This is the most common ballistic helmet used by law enforcement personnel Chase Tactical STRIKER ACH: Advanced Combat Helmet Level IIIA Standard Cut Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil­Std 662f NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory Materials Including: Kevlar® fibers and thermoset resin shell construction Head protection:  Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 4 pt H Harness Padding: D3O TRUST 7 Pad helmet system Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL Only shipments to CT. Please allow approx. 4-5 Weeks for shipment. BALLISTICS Cartridge Projectile Vel  (ft/s ± 30)  Vel  (m/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352 V50 17 gr 2221 677 SIZE Size  Length    Width   Circumference  Weight S 7.1 to 7.6  5.6 to 6.0  21.1 to 21.9 2.7 lbs M 7.6 to 7.9  6.6 to 6.3 21.9 to 22.7 2.8 lbs L 7.9 to 8.3  6.3 to 6.5  22.7 to 24.0 3.0 lbs XL  8.3 to 8.8  6.5 to 7.1  24.0 to 26.0 3.2 lbs  

STRIKER Level IIIA PASGT Helmet by Chase Tactical The STRIKER PASGT helmet (Personnel Armor System for Ground Troops) is designed according to the latest US Military requirements, utilizing the most advanced protection against handgun ammunition. The shell is composed of a multi-layered advanced composite. The harness assembly consist of the standard three-point harness with options for other harness assemblies unique impact protection. STRIKER Level IIIA PASGT Helmet Features: STRIKER PLT: Standard PASGT Protection: Level IIIA Stand Alone Against Handgun Ammunition NIJ Standard 0101.06: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 by an NIJ accredited laboratory Materials Including: Kevlar® fibers and thermoset resin shell construction Head protection:  Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 3 PT US PASGT Harness Sizing: Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes. Reason: Maximum Ballistic Protection. Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 4-5 Weeks for shipment. BALLISTICS Cartridge Projectile Vel  (ft/s ± 30)  Vel  (ft/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352 V50 17 gr 2258 688   Size Chart Size  Length     Width   Circumference  Weight S 7.1 to 7.6  5.6 to 6.0  21.1 to 21.9 2.8 lbs M 7.6 to 7.9  6.6 to 6.3 21.9 to 22.7 2.9 lbs L 7.9 to 8.3  6.3 to 6.5  22.7 to 24.0 3.1 lbs XL  8.3 to 8.8  6.5 to 7.1  24.0 to 26.0 3.3 lbs  

The Chase Tactical Triple 5.56 Mag Pouch holds three 5.56 mags in a compact side by side panel configuration. Three compartment pouches utilize a bungee retention system, securing the magazine until needed.  Bungee retention tabs made of hypalon for maximum grip when pulled, reliable, secure and highly effective.  Compatible with all MOLLE/modular webbed systems.  The outer layer is constructed from beefy 500 weight solution dyed Cordura®, fabric that improves and softens with time and wear, allowing it very durable without being heavy.  Reverse stitching is used wherever possible to enhance durability.  As with most high-quality items, it gets better with age.  As always, it’s the attention to detail that determines quality.  Made from genuine U.S. Mil-Spec made materials.  Chase Tactical products are backed by our lifetime limited warranty and meant to be abused. Triple 5.56 Mag Pouch Features: Holds three 5.56 mags Bungee retention tabs made of Hypalon Compatible with all MOLLE/modular webbed systems Made of 500D Cordura Made from genuine U.S. Mil-Spec made materials Chase Tactical products are backed by our lifetime limited warranty and meant to be abused

The Chase Tactical Triple Velcro Mag Pouch for 5.56mm mags, which attaches to the front of the carrier by means of Velcro and is then secured shut by overlapping the Velcro elements of the side elastic side sections. These pouches are designed to work with the Chase Tactical LVPC & SOCC Plate Carriers and are made from Genuine U.S. Mil Spec materials. Mags pictured not included.

The Triple Kangaroo Magazine Pouch 5.56 + Pistol is made with the best tactical nylon designed for durability. Overall, this magazine pouch will keep your pistol and rifle mags secure yet easily retrieved throughout all your missions. Chase Tactical’s Triple Kangaroo pouch is a unique and premium quality product, our mag pouch allows you to carry your 30 round 5.56mm rifle magazine and any caliber pistol magazines in one MOLLE pouch without the need for plastic and Kydex® inserts. Our Triple Kangaroo Mag Pouch holds 3 standard 5.56mm rifle mags and 3 pistol mags. The pistol pouch will accept 9mm, .40mm, and .45mm caliber magazines as well as your standard issue GI aluminum, PMag®, EMag®, HexMag, and HK® 416 magazines. (Not suited for G36 Magazines). The main compartment is accessed via bungee retention with the front pistol mag pouch being accessed via a Velcro lid. It features a hook and loop flaps on the pistol mags, and open tops on the riffle mags. Our signature Hypalon pull tabs, add extra grip when accessing the rifle mags. It also has internal adjustments for height to accommodate varying size rifle mags. Mags pictured not included.

The Chase Tactical Triple Pistol Magazine Pouch is compact and allows the cover flap to be rolled down and secured with Velcro fixing to allow fast access to mags. Mags pictured not included.

The NAR Chest Tube Insertion Kit is designed to provide the necessary equipment needed to perform emergency chest tube thoracostomy. The compact and lightweight kit is packaged in an easy to open, vacuum sealed pouch, the kit can be stored in your kit or crash cart. Kit Contents: 1 x Petrolatum Gauze - 3 in. x 18 in. 1 x Scalpel, #10 - Protected 1 x Hemostat, Kelly Curved - 5.5 in. 1 x Drape, Sterile 18 in. x 25 in. Fenestrated 1 x Pair, Glove, 8.5 Sterile Surgical Latex 1 x Chest Tube Valve 1 x Chest Tube, 36 French Soft 1 x Chloraprep Swabsticks, 3 per pkg 1 x 4 in. x 4 in. Split Sponge 1 x 0-Silk Suture, 30 in. 1 x 8 in. Curved Rochester-Pean, Sterile Dimensions: L 12 in. x W 7.5 in. Weight: 9.8 oz

Introducing ChitoGauze® XR PRO, a revolutionary hemostatic dressing for the external, temporary control of severely bleeding wounds. It is the next generation of chitosan dressing that is composed of a polyester/rayon blend non-woven medical gauze that is coated with chitosan.  Featuring an embedded x-ray detectable strip, it is Z-folded and packaged in a vacuum sealed pouch that is compact and rugged. ChitoGauze® XR PRO maximizes hemostatic performance and reduces the risk of re-bleeding by providing effective hemostasis outside of the normal clotting cascade.  ChitoGauze® XR PRO also has natural antibacterial properties against a wide range of gram positive and gram negative microorganisms which are beneficial in presence of debris and environment before the injured are treated with antibiotics or are transferred to a medical treatment facility. Designed for the battlefield, ChitoGauze® XR PRO is an efficacious and easy-to-apply dressing that maximizes hemostatic performance before severe bleeding turns deadly.  

Introducing ChitoGauze® XR2 Pro, a hemostatic dressing for external, temporary control of severely bleeding wounds. It is the next generation of chitosan dressing that is composed of a polyester/rayon blend non-woven medical gauze that is coated with chitosan. Featuring two embedded x-ray detectable strips, it is Z-folded and packaged in a vacuum sealed pouch that is compact and rugged. ChitoGauze® XR PRO maximizes hemostatic performance and reduces the risk of re-bleeding by providing effective hemostasis outside of the normal clotting cascade. ChitoGauze® XR PRO also has natural antibacterial properties against a wide range of gram-positive and gram-negative microorganisms which are beneficial in presence of debris and environment before the injured are treated with antibiotics or are transferred to a medical treatment facility. Designed for the battlefield, ChitoGauze® XR2 PRO is an efficacious and easy-to-apply dressing that maximizes hemostatic performance before severe bleeding turns deadly. SPECS: Z-Fold Vacuum Packed for easy application Featuring unique dual line of embedded x-ray detectable strips Readily conforms into the wound surfaces with complex geometries to rapidly staunch bleeding and seal the wound site Offers antimicrobial properties against 26 bacterial organisms Non-woven, polyester/rayon blend medical gauze is coated with chitosan to maximize its performance and control severe bleeding Dimensions: Package Size: H 5.75 in. x W 5.0 in. x D 0.65 in. Product Size: 3 in. x 4 yd Weight: 0.045 lbs

1″ Cloth Tape — Single or Box of 12

2″ Cloth Tape — Single or Box of 6

2″ Cohesive Self-Adherent Wrap, Tactical Black – Single Roll or Box of 24 Perfect for securing packing gauze, reinforcing bandages, holding down dressings, and affixing malleable splints in place.

Experience the Fastest, Safest, and Most Effective Prehospital Field Tourniquet with the Genuine Gen. 7 CAT Tourniquet! Key Features: Proven 100% effective by the U.S. Army’s Institute of Surgical Research Operated with a durable windlass system and patented internal band for optimal blood flow occlusion. Easy one-handed application for use under survival stress or compromised fine motor skills. Enhancements in Gen 7 for faster application, decreased blood loss, and simplified training. Reinforced windlass rod for enhanced strength and improved grip Bilateral windlass clip for rapid lock and added strength. Redesigned windlass strap for safe and secure application time documentation Reinforced stabilization plate with beveled contact bar for added durability. Signature red elliptical tip (Red Tip Technology®) for visual cue during application Patented free-moving internal band for evenly distributed circumferential pressure. Dimensions: Packaged: L 6.5 in. x W 2.4 in. x D 1.5 in. Open Length: 37.5 in. Weight: 2.7 oz

Developed with the end-user requirements and skill set in mind, our innovative Combat Casualty Response Kit®-Squad Kit™ capitalizes on durability, versatility, mobility, and efficiency. The kit’s medical supplies are carefully selected to address the top three causes of death from penetrating trauma as identified by the COTCCC (60% extremity bleeding / 33% tension pneumothorax / 6% airway obstruction). The bag itself features the Enhanced Hip Stabilization System to keep the Squad Kit bag from flipping over when worn at the waist.  There is a large, contoured, central compartment with multiple attachment points & front trauma-shear storage. Multiple-load carriage capabilities allow for fanny pack, over the shoulder carry, and attachments for 3-day assault packs & MOLLE-style webbing are standard. Available in NAR’s 11 point Berry Amendment Nylon Standard. SPECIFICATIONS 500D CORDURA® Solution-Dyed Nylon with Near Infrared Signature Reduction Ghillie-Tex IR signature reduction hardware Sand & water resistant, self-repairing zipper with silent 550 cord pulls Multiple-load carriage configuration capabilities: fanny pack, over the shoulder, attachments for 3-day assault packs and MOLLE style webbing Enhanced Hip Stabilization System for greater security during transport Trauma Shear Storage on Front for Quick Access   KIT CONTENTS: 1 x Bag (CCRK® Squad) 5 x pair Black Talon® Nitrile Trauma Gloves 2 x Nasopharyngeal Airway 28F with Lubricant 1 x Petrolatum Gauze (3 in. x 18 in.) 1 x HyFin® Chest Seal 2 x ARS® Needle Decompression Kit (14 G x 3.25 in.) 2 x C-A-T® (Combat Application Tourniquet®) 4 x ETD™ 6 in. Emergency Trauma Dressing 4 x S-Rolled Gauze™ (4.5 in. x 4.1 yd) 1 x ETD™ Abdominal Emergency Trauma Dressing 2 x SAM® Splint II 1 x Trauma Shears (7.25 in.) 4 x Polycarbonate Eye Shield 1 x Surgical Tape (2 in.) 1 x Combat Casualty Reference Card 2 x Triage Card (NAR T2 Tag®) DIMENSIONS: Case Closed: H 7.75 in. x W 13 in. x D 9 in. Weight: 4 lb 6.5 oz

Safeguard Medical's Combat Eye Shield patented design (Design Patent No. D674,903) according to the specifications of several active-duty surgeons of OIF/OEF to cover penetrating eye injuries. The Combat Eye Shield is designed to meet the CoTCCC guidelines for the treatment of penetrating eye trauma while providing a small, sterile package to fit in any trauma kit. The Combat Eye Shield is composed of a 6-inch Hydrogel disc that surrounds an aluminum fox eye shield, giving a large surface area to attach to the casualty that will not harm adjacent trauma or burns. The Combat Eye Shield also comes with one 4″ x 4″ Gauze Pad to clean the surface of the wound area before applying the shield. The package comes vacuum sealed and sterilized for immediate use. Not made with Natural Rubber Latex. Package Dimensions: 3.25″ x 8″ x 0.5"

The H&H Combat Medic Reinforcement Tape gives First Responders added security and support when gauze and elastic straps are not enough. Made from high-quality adhesives and reinforced backing, the H&H Combat Medic Reinforcement Tape is small enough to fit in any kit but gives 100 inches of 2″ tape for all kinds of uses. From additional security for bandages to reinforcing compression to stop blood loss, the H&H Combat Medic Reinforcement Tape is pocket-sized security in any situation. Ordering Information Item Number: CMRT01 Quantity: Individual Roll NSN: 6510-01-549-0927 Package Dimensions: 2" wide x 1.5" diameter Package Weight: 1.25 oz Adhesive made with natural rubber latex

This Combat Tourniquet Holster is specifically designed to fit the Gen 7 CAT tourniquet and other combat TQs. The rear straps allow for an easy and reliable attachment to any MOLLE platform. The holder's adjustable height and customizable mounting positions enable it to be mounted both horizontally and vertically. Its longer rear straps even accommodate duty belts up to 3" wide.  The Rigid Tourniquet Holder offers essential protection for first responders and public safety personnel. Its secure and adjustable design accommodates the Gen 7 C-A-T combat tourniquet for fast deployment in an emergency. Mount it vertically, horizontally, or at a right or left angle, and adjust its height to suit your unique needs. Injection molded to fit the tourniquet perfectly, no straps, flaps, or buckles are needed. Keep your tourniquet near in an emergency with this reliable holder.

THE BAG: The LXMB10 is our most compact first responder bag. It holds the same standard fill kit as our LXMB20, but with a more streamlined fit and value minded design. The bag consists of a main hold with customizable dividers, a storage flap with 6 elastic tool loops, and two full length zippered side pockets. Unlike similar bags with buckled flaps, the MB10 has all zippered compartments – so everything stays in place until you need it. The webbing carry straps feature a hook and loop strap grabber to keep the handles in place. Finally, the sides and back include yellow & silver triple trim reflective tape for added visibility on scene, and an ID card holder for easy identification. THE KIT: Fill kit included with the following supplies: Tweezers Kelly Hemostats Trauma Sheers Bandage Sheers, Penlight Ammonia Ampules (10) Band-Aids (100) 4″ x 4″ Gauze Pads (50 – as 25 packs of 2) 2″ Roll Gauze (2), 3″ Roll Gauze (2), 4″ Roll Gauze (2), 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape Iodine Wipes (10) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (2) Eye Pads (2) Triangle Bandage (2)  Eye Wash Irrigation Solution, Nitrile Exam Gloves (4) Universal SAM Finger Splint Oral Glucose Gel Adult Blood Pressure Cuff w/ Case Sprague Stethoscope, CPR Barrier w/ One-Way Valve Oropharyngeal Airway Kit (6 colored sizes) Sting & Bite Relief Swabs (10) First Aid Guide, 4″ x 4″ Burn Dressing (2) [WHAT’S IN THE KIT?] – Full contents of the LXSMK-B standard fill kit listed in description above [HOW BIG IS IT?] When assembled, our LXMB10 trauma bag measures 14″ (L) x 9″ (W) x 7″ (H) [WHAT DOES THE INSIDE LOOK LIKE?] The main compartment has built in foam dividers that can be configured to organize your supplies [HOW DO I KEEP TRACK OF IT ON SCENE?] Each side has yellow and silver reflective tape and the rear has an ID card holder for easy identification and visibility [WHAT MAKES THIS ANY BETTER THAN SIMILAR BAGS?] Aside from the limited lifetime warranty, our bag features double layer construction, padded main hold, lined compartments, embroidered star of life, reinforced stitching and all-zippered compartments. Buy with confidence!

The LXMB10 is our most compact first responder bag. It holds the same standard fill kit as our LXMB20, but with a more streamlined fit and value minded design. The bag consists of a main hold with customizable dividers, a storage flap with 6 elastic tool loops, and two full length zippered side pockets. Unlike similar bags with buckled flaps, the MB10 has all zippered compartments – so everything stays in place until you need it. The webbing carry straps feature a hook and loop strap grabber to keep the handles in place. Finally, the sides and back include yellow & silver triple trim reflective tape for added visibility on scene, and an ID card holder for easy identification. When assembled, the bag measures 14″ (L) x 9″ (W) x 7″ (H) The Kit: The LXSMK-A Kit Includes: Tweezers Kelly Hemostats Trauma Sheers Bandage Sheers Penlight Ammonia Ampules (10) Band-Aids (100) 4” x 4” Gauze Pads (50) 2” Roll Gauze (2) 3” Roll Gauze (2) 4” Roll Gauze (2) 2” Self-Adherent Bandage (2) 2” Elastic Bandage (2) 5” x 9” ABD Pad (2) 8” x 10” ABD Pad (2) 1” Roll Cloth Tape Iodine Wipes (10) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (2) Eye Pads (2) Triangle Bandage (2) Eye Wash Irrigation Solution, Black Nitrile Gloves (2 Pairs) Universal SAM Finger Splint Oral Glucose Gel Sting & Bite Relief Pads (10) First Aid Guide Booklet 4” X 4” Burn Gel Dressing (2) In addition to being able to hold all this great kit, the bag features nylon carry straps have reflective stitched right into the webbing, with multiple pockets and compartments and covered with reflective striping for added visibility.  The bag was recently updated and now features a waterproof PVC reinforcement on bottom

The CORE Kit contains the Committee on Tactical Combat Casualty Care’s (CoTCCC) #1 recommended prehospital tourniquet – the patented Combat Application Tourniquet® (C-A-T®), the #1 CoTCCC recommended Hemostatic Dressing – Combat Gauze® and a 4 in. Flat Emergency Trauma Dressing (ETD). Designed to go where you go, this compact medical kit will fit in a BDU pocket, vest pouch or Go-Bag and provides personnel with essential life-saving bleeding control equipment that can be kept on their person. The CORE Kit is packaged in a compact, rugged, clear vacuum-sealed bag with easy-to-open tear notches. Be equipped with the most effective components at the best value available on the market.  SPECIFICATIONS Compact design with the essential life-saving equipment needed to address moderate and severe traumatic bleeding Contains the #1 CoTCCC Recommended Prehospital Tourniquet and Hemostatic Gauze The Best Tourniquet paired with the Best Hemostatic Gauze and an effective pressure bandage at the Best Price Meets the Tactical Emergency Casualty Care (TECC) Guidelines for hemorrhage control Small, compact kit designed to fit in a BDU pocket, vest pouch or individual Go-Bag Up to a 5-year expiry on its sterile components KIT CONTENTS: 1x C-A-T® Tourniquet, Black 1x Combat Gauze® LE Hemostatic Dressing 1x 4 in. Responder ETD (Emergency Trauma Dressing) DIMENSIONS: Dimensions: H 7 in. x W 3.5 in. x D 2.25 in. Weight: 6.4 oz

North American Rescue’s Compressed Gauze is an ultra-compact roll of sterile, high quality 100% cotton gauze that utilizes a unique crinkle weave that has excellent fluid absorption. It is a 6-ply, 4.5” x 4.1 yd. gauze with finished edges to reduce loose ends or lint. The gauze is indicated for the treatment of bleeding and the dressing and bandaging of wounds. NAR’s Compressed Gauze features a proprietary packaging process that ensures the most consistent, low-cube package on the market. The package is a rugged and durable vacuum sealed container with easy-to-open tear notches. The ultra-compact storage size expands once opened to cover larger wound areas. NAR’s Compressed Gauze is an essential item for any medical kit and can be used to control hemorrhage in conjunction with a compression bandage, used as backing gauze for hemostatic dressings or for wound bandaging.

The Crisis Incident Response Kit from North American Rescue is designed to provide the necessary medical products to treat the more serious medical emergencies that may occur in a school setting. This ruggedized Nylon kit was designed to combat life threatening emergencies such inability to breathe or major bleeding. This high-visibility orange kit is easy to identify and provides carrying options such as over the shoulder, hand carry and fanny-pack style.  KIT CONTENTS: 2 x ORG C-A-T® Tourniquets 4 x NAR Compressed Gauze 4 x NAR 4 in. Emergency Trauma Dressing (ETD) 4 x NAR 6 in. Emergency Trauma Dressing (ETD) 1 x NAR Abdominal Emergency Trauma Dressing (ETD) 2 x Petrolatum Gauze 2 x CPR Microshield 2 x SAM Splint II 1 x roll 2 in. Surgical Tape 5 x pair Bear Claw Gloves, large 1 x NAR 7.25 in. Trauma Shears 50 x Flexible Fabric Bandages 2 x Survival Blanket  Dimensions: Packaged: H 7.75 in. x W 13 in. x D 9 in. Weight: 5 lb.