The Quantum Thermal Infusion Set (TIS) from LifeWarmer is the revolutionary IV tubing set that allows for safe, rapid warming of IV fluids without adding hardly any additional steps to the normal IV setup process. Modeled after standard IV infusion tubing, the familiar configuration allows for ease of use. The sophisticated intelligence and proprietary warming technology are integrated into the tubing system for simplicity and to reduce additional equipment and procedural steps. Roughly the same size and weight as standard IV tubing, there is almost no additional equipment burden. The Quantum IV administration tubing is double-extruded to yield a configuration that has both an inner tubing layer and an outer tubing layer. A conductive heating element is between the two layers but does not come in contact with the fluid path or disrupt the laminar flow. The outer tubing layer acts as an insulator while the inner tubing layer transfers the heat from the heating element to the fluid path. Thermistors located in the tubing continually measure temperature and provide that input to the Quantum Controller. The monitoring and independent application of energy (heat) along the fluid path allows the Quantum to respond to varying temperature inputs from the fluid source to near the point of patient entry to ensure fluid temperature is the right temperature at delivery. The Quantum Life Warmer, fully charged, is able to warm and maintain up to approximately 1700 mL of 20ºC IV solution to a set point of 100.4°F (38°+/- 2°C)  at a flow rate of 200 mL/min. Effective warming flow rates range from 2 to 200 mL/minute depending on input fluid temperature and ambient conditions. SPECS: Similar size and weight to traditional IV tubing Intelligent sensing and heating elements from LifeWarmer integrated into the walls of the tubing set No disruption to the fluid path or laminar flow of the fluid Easy bi-directional connection to the Quantum Life Warmer Controller Compatible with standard IV fluids Standard Spike with Vent 15 micron particulate filter Luer-activated injection site Male Luer lock adapter Tubing length: 80 in. Priming Volume: 16mL Drip Chamber: 20 gtt/ml Single Use Only, Supplied sterile via Ethylene Oxide Drip rate: 20 gtts/ml Dimensions: TIS packaged (each): 6.5 in. x 11 in. Tubing Length: 80 in. Weight: TIS (each): 2.1 oz Packaged (2 TIS & box): 10 oz

The Quantum Thermal Transfusion Set- Blood from LifeWarmer is the revolutionary IV tubing set that allows for safe, rapid warming of blood, blood products, or IV fluids without adding hardly any additional steps to the normal IV setup process. Modeled after standard blood infusion tubing, the familiar configuration allows for ease of use. The sophisticated intelligence and proprietary warming technology are integrated into the tubing system for simplicity and to reduce additional equipment and procedural steps. Roughly the same size and weight as standard blood tubing, there is almost no additional equipment burden. The Quantum IV administration tubing is double-extruded to yield a configuration that has both an inner tubing layer and an outer tubing layer. A conductive heating element is between the two layers but does not come in contact with the fluid path or disrupt the laminar flow. The outer tubing layer acts as an insulator while the inner tubing layer transfers the heat from the heating element to the fluid path. Thermistors located in the tubing continually measure temperature and provide that input to the Quantum Controller. The monitoring and independent application of energy (heat) along the fluid path allows the Quantum to respond to varying temperature inputs from the fluid source to near the point of patient entry to ensure fluid temperature is the right temperature at delivery. The Quantum Life Warmer, fully charged, is able to warm and maintain up to 2 units ( 900mL +/- 100mL) of cold (4ºC) blood products or IV solutions to a pre-set temperature of 100.4°F (38°+/- 2°C) at a flow rate of 100 mL/min (depending on the ambient temperature). Or, approximately 1700 mL of 20ºC IV solution to a set point of 38ºC +/- 2ºC at a flow rate of 200 mL/min. Effective warming flow rates range from 2 to 200 mL/minute depending on input fluid temperature and ambient conditions. SPECS Compatible with blood, blood products, and standard IV fluids Similar size and weight to traditional IV tubing Intelligent sensing and heating elements from LifeWarmer integrated into the walls of the tubing set No disruption to the fluid path or laminar flow of the fluid Easy bi-directional connection to the Quantum Life Warmer Controller Dual Spike with Vent 200 micron filtered drip chamber Luer-activated injection sites (2) Male Luer lock adapter Tubing length: 80 in. Priming Volume: 22mL Single Use Only, Supplied sterile via Ethylene Oxide Drip rate: 20 gtts/ml Dimensions: TTS-B package (each): 6.5 in. x 11 in. Tubing Length: 80 in. TTS-B Weight (each): 2.6 oz Packaged Weight (2 TTS-B & box): 11 oz

"The advantage of the direct transfusion of human blood in cases of severe haemorrhage which we encounter in the emergencies of military surgery cannot to our minds, be overestimated." 1 The above comment, from a paper presented by Lieutenant Colonel A. Primrose of the Canadian army Medical Corps in 1916, remains as pertinent today as during those earlier days of military transfusion medicine... The Quantum Field Blood Transfusion Kit from North American Rescue is a comprehensive kit providing all the needed supplies to allow the user to rapidly perform a field blood transfusion as outlined in the Joint Theater Trauma System Clinical Practice Guidelines. This kit is designed for use with the game-changing Quantum Blood and Fluid Warming System. It's featured component, the Quantum Thermal Transfusion Set - (Blood), incorporates an integrated heating system that does not disrupt the fluid path. Together with the Quantum Blood & Fluid Warming System, providers help to ensure consistent normothermic whole blood delivery in far forward and near point of injury (POI) prehospital casualty management. In addition, this kit allows for donor and recipient blood type verification as well as the collection of donor blood samples for additional surveillance testing. Quantum Field Blood Transfusion Kit Contents: 1 x Single Blood Bag (450ml) 1 x Quantum TTS-B (Thermal Transfusion Set - Blood) 1 x Beaded Security Tie - 11 in. 1 x 550 Cord - 10 in. 1 x Kelly Curved Hemostat - 5.5 in. 1 x Black Permanent Marker, Lg 2 x pair Bear Claw Gloves - Tan, Large 1 x roll 1 in. Surgical Tape 1 x 572-EWB ASBP Card 1 x Donor Module each containing: 1 x IV Constricting Band - 1 in. x 18 in. 1 x Eclipse Vacutainer Holer, 21ga 1 x Vacutainer, Purple Top (6ml) 2 x Vacutainer, Red Top (6ml) 1 x Kelly Curved Hemostat - Disposable - 5.5 in. 1 x Single Blood Bag (450ml) 1 x Blood Bag Sticker 1 x 550 Cord - 10 in. 1 x Beaded Security Tie - 11 in. 2 x Alcohol Prep Pad 2 x 2-pack Gauze Pad - 4 in. x 4 in. 1 x Clear Adhesive Dressing - 4 in. x 4.75 in. 1 x Chloraprep Swabsticks, 3pk 1 x Surgical Tape, 1 in. 1 x pair Bear Claw Gloves - Tan, Large 1 x Permanent Marker, Large 1 x 572-EWB ASBP Card 1 x Donor Placard 1 x Recipient Module each containing: 1 x IV Constricting Band - 1 in x 18 in. 1 x IV Catheter - 16 ga x 1.25 in. 1 x IV Catheter - 18 ga x 1.25 in. 1 x Y-Type IV Set w/ Filter 2 x Alcohol Prep Pad 2 x 2-pack Gauze Pad - 4 in. x 4 in. 1 x Clear Adhesive Dressing - 4 in. x 4.75 in. 1 x Eldon Blood Type Kit 1 x Chloraprep Swabsticks, 3pk 1 x Surgical Tape, 1 in. 1 x pair Bear Claw Gloves - Tan, Large 1 x Permanent Marker, Large 1 x SF-518 Card 1 x Recipient Placard Dimensions: L 10 in. x W 7 in. x D 2.5 in. Weight: 1.09 lb   1 Primrose A, Ryerson ES. The Direct Transfusion of Blood: Its Value in Haemorrhage and Shock in the Treatment of the Wounded in War. Br Med J. 1916;2:384–386.  

The LifeWarmer Controller comes fitted with a cover that permits the mating (connection) of the TIS or TTS-B tubing circuit connector to the connector slot on the Controller. The Controller Cover should remain in place for device operation. The Cover also protects the Controller and should be replaced after approximately 10 uses or 6 months

The Quantum Battery from LifeWarmer is an extremely powerful and intelligent battery in a small, lightweight package- weighing only 16 oz. The Quantum Battery powers the whole warming system with state-of-the-art Lithium Polymer cells harnessing 44 Volts of electrical potential. The battery, fully charged, is able to warm and maintain up to 2 units ( 900mL +/- 100mL) of cold (4ºC) blood products or IV solutions to a pre-set temperature of 100.4°F (38°+/- 2°C) at a flow rate of 100 mL/min (depending on the ambient temperature). Or, approximately 1700 mL of 20ºC IV solution to a set point of 38ºC +/- 2ºC at a flow rate of 200 mL/min. The Quantum Battery is built for use in the most austere and tactical environments. It is IP67 rated for water resistance and is the only portable fluid warming battery that has a disable feature on the audible alarm for tactical considerations. The Quantum Life Warmer Battery is rechargeable with a service life of 500 charge/discharge cycles. It is important to keep the Quantum Battery charged and ready for use. Always re-charge after deployment, even if the battery was not fully discharged. The battery can be kept plugged into the Quantum Charger, as the intelligent Battery senses charge demand and will charge as needed but never overcharge. The Battery has a “Status” button to check the state of charge at any moment, with 3 colored LEDs to inform the user about the condition of the battery. Specs: Lightweight at only 16 oz Designed for the tactical environment- water resistant, subdued color, and the option to disable the audible alarm 44V Lithium-Polymer Battery Intelligent, state-of-the-art battery technology Rated 910 mAh capacity 40.4 Wh Energy Rating IP67 Rated water resistant Service Life 3 years or 500 charge/discharge cycles Operating Conditions: -20ºC to 50ºC for use, 0ºC to 45ºC for charging Storage conditions: -20ºC to 60ºC Dimensions: Battery Case: H 4.5 in. x W 3.25 in. x D 1.25 in. Weight: 16 oz

The Quantum LifeWarmer Controller is the command center of the Quantum Blood and Fluid Warming System. It contains the microprocessor and control algorithm that continually assesses temperature input from tubing thermistors and regulates the energy provided to the tubing heating elements in the proximal and/or distal segments to reach and maintain temperature between 100.4°F (38°+/- 2°C) at patient delivery. The Controller receives power when connected to the Battery and modulates the energy flow to the TIS/TTS-B. The Quantum Controller has two connections, one for the battery and one for the Thermal Tubing of choice. The connection to the battery is an omni-directional plug for ease of insertion and the connection is safe and secure. The connection to the TIS or TTS-B is bi-directional and simple to execute- it’s plug and play. The Controller has LED lights on the shoulder of the device to inform the user about the output temperature and flow of the fluid. It will visually alert the care provider to the status of the system. The Controller is reusable and comes fitted with a Jacket that permits the mating (connection) of the TIS or TTS-B Life Warmer tubing circuit connector to the connector slot on the Controller. Specs: Moderates the energy flow from the Quantum Battery to the Thermal Tubing Designed for ease of connecting and durability Colored LED lights constantly show during administration of blood/fluid to show status Extremely lightweight and durable IP53 rated for dust and water resistance with jacket Minimum service life - 1000 insertions/removals Dimensions: Controller Body: W 1.25 in. x H 3 in. x D 0.75 in. Controller Total Length: 51.25 in. Weight (Controller only): 2.5 oz Packaged Weight: 5 oz

The Quantum Battery Charger from LifeWarmer is an AC-powered reusable device that can fully charge the Quantum Battery rapidly and safely. The Charger has built-in algorithms to ensure proper, steady charging without overcharging or damaging the health and integrity of the battery. The Battery can go from nearly 0% to full within 90 minutes. The Life Warmer Charger has two colored LED lights to inform the provider of the status of charge and condition of the battery. The Quantum Battery Charger connects to the Battery via an omni-directional plug that allows for rapid energy transfer while prioritizing safety even in cases of hasty disconnection. The Quantum Battery will alert the user if there is any issue associated with the health of the battery. The Charger comes supplied with a 6-foot AC power cord. Specs: Fully charge the Quantum Battery in <90 minutes Smart, safe charging Comes with 6 ft AC power cord Colored LED lights to inform the user of charging and battery status IP 22 rated for dust and water resistance 100V to 264V AC input; 50Hz, 60Hz Minimum service life- 2500 insertions/removals Dimensions: Charger: H 6 in. x W 2.25 in. x D 1.75 in. AC power cord length: 6 feet Charger Weight: 1 lb 4 oz Weight with cord: 1 lb 10 oz

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The Side Plate is constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate that is rated at Level III Plus - capable of stopping 7.62x51mm. FEATURES: Curved 6" X 6" Square Cut for side coverage. Single curve to better conform to the side of the body for more comfort. Can be used for the side pockets of some plate carriers with 6" X 6" side pockets. Ideal for use in some VISM Plate Carriers with 6" X 6" side panel pockets. Weight: 17.1 oz. (6”X6” Square Cut) Fully sealed to protect against liquids, chemicals, and other harsh elements Assembled in the U.S.A.

The Releasable-Abdominally-Integrated-Drop -or- RAID V2 Kit (available in Basic, Basic with Combat Gauze®, Basic with CeloxTM Gauze, Advanced, and Advanced with CeloxTM options) is designed to meet the need for an individual first aid kit which provides the end user several options for carrying the essential life-saving equipment for point-of-wounding and self-aid/buddy-aid to address the leading causes of potentially preventable death in a tactical environment. Shaw Concepts RAID V2 Pouch’s unique take on the industry standard hanger combined with utility of fanny pack allows the end user to decide how to wear it based on their need to access its contents during self-aid and/or hand off the pouch to others for buddy-aid. The First Spear Tube makes reattaching the pouch as easy as removal. SPECS: Comes in multiple configurations: Basic, Basic with Combat Gauze, Basic with Celox, Advanced, and Advanced with Celox options Designed to meet the need for an individual first aid kit with multiple carry options First Spear Tube makes reattaching the pouch as easy as removal All Kits Include the Following Contents: 1 x C-A-T® (Combat Application Tourniquet®) - Black 2 x NAR® Gauze, S-Rolled 1 x ETD® Dressing, 4 in. 1 x HyFin® Vent Compact, Twin Pack 1 x Nitrile Gloves, Lg 1 x NAR® Trauma Shears The Advanced Kit adds a 28F NPA and 14 ga. ARS Needle You can buy both BASIC and ADVANCED versions with Combat Gauze or Celox Gauze. Dimensions: H 8 in. x W 7 in. x D 2 in. Weight: 3 lbs 3.2 oz

Every good adventure requires that everyone gets home safely. The new Rugged Outdoor CARE Kit is the perfect companion for any outdoor environment. The ROCK-XL contains essential first-aid supplies to treat common injuries to include basic injuries such as cuts, scrapes, bites & stings as well as the life-saving equipment to control major bleeding. The ROCK-XL  comes in the ultimate personal utility case that is crushproof, dustproof and adventure proof! Your first-aid and trauma supplies will be protected from the outdoor elements to help ensure your kit is ready if ever needed. Waterproof up to a depth of 2 meters for up to 30 minutes, IP68 rated protection from water, dirt, snow & dust and rubberized protective bumpers to protect against drops. The case handles can be used to secure the kit for your outing as you can strap it to your gear, ATV/UTV, motorcycle, camper or whatever you use to get you to where the adventures are. This kit fits in the bottom of your backpack, beach bag, or can be lashed to your paddle board, surfboard or kayak. It's small enough to go into a truck's center console, and under the seat of a car. It floats, is water tight and crush proof. Kit Contents: 1 x C-A-T® Tourniquet, Orange 1 x Responder Compressed Gauze 1 x 4 in. Mini ETD (Emergency Trauma Dressing) 1 x HyFin® Vent Chest Seal Twin Pack 10 x Butterfly Bandage 10 x Bandage (1 in. x 3 in.) 2 x Gauze Pad 2-pack (4 in. x 4 in.) 1 x Burntec Dressing (4 in. x 4 in.) 5 x Burn Gel 1 x CPR Face Mask 5 x Antibiotic Ointment 3 x Sting & Bite Packet 3 x Salty Britches Chafing Ointment - Single Use 1 x Emergency Survival Blanket (52 in. x 84 in.) 5 x Hand Sanitizer 2 x Pair, Responder Nitrile Gloves, Large 1 x Mini Duct Tape (2 in.) 1 x Black Permanent Marker, Large 1 x Bleeding Control Instruction Card 1 x Triangular Bandage (40 x 40 x 56 in.) 1 x Splinter Forceps, 4.5 in. 1 x Trauma Shears, Large 1 x Pelican Ruck R60 Case 1 x Optional Hemostatic Gauze of Choice Dimensions: H 8.9 in. x W 5.4 in. x D 3 in. Weight: 3 lb.

Every good adventure requires that everyone gets home safely. The new Rugged Outdoor CARE Kit is the perfect companion for any outdoor environment. The ROCK contains essential first-aid supplies to treat common injuries to include basic injuries such as cuts, scrapes, bites & stings as well as the life-saving equipment to control major bleeding. The ROCK  comes in the ultimate personal utility case that is crushproof, dustproof and adventure proof! Your first-aid and trauma supplies will be protected from the outdoor elements to help ensure your kit is ready if ever needed. Waterproof up to a depth of 2 meters for up to 30 minutes, IP68 rated protection from water, dirt, snow & dust and rubberized protective bumpers to protect against drops. The case handles can be used to secure the kit for your outing as you can strap it to your gear, ATV/UTV, motorcycle, camper or whatever you use to get you to where the adventures are. This kit fits in the bottom of your backpack, beach bag, or can be lashed to your paddle board, surfboard or kayak. It's small enough to go into a truck's center console, and under the seat of a car. It floats, is water tight and crush proof. Kit Contents: 1 x C-A-T® Tourniquet, Orange 1 x HyFin® Vent Chest Seal Twin Pack 1 x Responder Compressed Gauze 1 x 4 in. Mini ETD (Emergency Trauma Dressing) 5 x Butterfly Bandage 5 x Bandage (1 in. x 3 in.) 3 x Burn Gel 1 x CPR Face Mask 3 x Antibiotic Ointment 2 x Sting & Bite Packet 1 x Emergency Survival Blanket (52 in. x 84 in.) 3 x Salty Britches Chafing Ointment - single use 3 x Hand Sanitizer 1 x Pair, Responder Nitrile Gloves, Large 1 x Mini Duct Tape (2 in.) 1 x Black Permanent Marker, Large 1 x Bleeding Control Instruction Card 1 x Pelican Ruck R40 Case 1 x I-ROK Case Label 1x Optional Hemostatic Gauze of Choice. Dimensions: Measurements (Interior): H 1.9 in. x W 7.6 in. x D 4.7 in. Measurements (Exterior): H 2.9 in. x W 9.8 in. x D 6.1 in. Weight: 2.41 lb.

The Pneumothorax Decompression Indicator CapnospotA More Accurate Decompression for Tension Pneumothorax NOTE: Needle is NOT included. Introducing the Pneumothorax Decompression Indicator Capnospot, a novel Visual Carbon Dioxide Detection Device for Needle Thoracostomy. Rapid, efficient, visual detection of needle placement providing immediate visual feedback that needle decompression was successful. It is lightweight and portable, with a real-time confirmatory color change from blue to yellow (essentially a binary "yes" or "no" in the presence of carbon dioxide), removing operator subjectivity. The Capnospot was initially designed and developed at a leading healthcare organization, and current clinical data demonstrates higher accuracy than clinical judgement alone. Product Features: Objective, visual indication of decompression Binary “yes” or “no” removes operator subjectivity Lightweight, portable, real-time confirmatory color change (from blue to yellow) Initially designed and developed at a leading healthcare organization Clinical data demonstrates higher accuracy than clinical judgement alone NOTE: Needle is NOT included. Compatible with existing decompression devices, catheters, and needles Package Contents 1 x Pneumeric™ Capnospot™ Pneumothorax Decompression Indicator Dimensions: Weight: 3.2 oz

This plate weighs 2.5 lbs. and is 0.55" thick.   Thinner than your steel plate and 3x lighter! Developed to protect against the most common rifle ammunition used in the AR and AK Platforms. As a leader in the industry, TAC 11 takes pride in crafting products that exceed expectations, and the ARK armor plate is no exception. For those seeking protection from ammunition fired from AR and AK rifle platforms, the ARK armor plate is the ultimate solution. This plate is specifically designed to meet the needs of those wanting a budget-friendly solution who do not want to sacrifice quality and performance. One of the key features of the ARK armor plate is its lightweight and multi-curve design. This design not only ensures maximum comfort during wear but also increases confidence during intense situations, allowing for greater mobility and maneuverability. This can be especially crucial in high-pressure situations where every second counts. In addition to its superior design, the ARK armor plate boasts a durable Line-X coating. This coating provides a layer of protection, safeguarding the plate against scratches, water, chemicals, and other types of damage that may occur during use. This ensures that your armor plate will be able to withstand the rigors of even the most demanding situations. This system was tested at an accredited ballistics laboratory using the NIJ 0101.06 standard (modified to encompass the M193 and 7.62×39 PS Ball MSC). Protection Level: Rifle Special ThreatThreats Tested: 5.56 M193 & 7.62×39 PS Ball MSCThickness: 0.55 in.Weight: 2.5 lbs.Sizes: 10”x12” SAPI cut Multi-CurveCovering: Line-X Defense Formula PolyureaWarranty: 7 Years

The bag is sold empty; contents are for display purposes only. This Elite Bags LARGE EMS Bag is designed for medical professionals. It weighs 4 lb unpacked and measures 20" x 13" x 10", featuring an oversized main compartment with adjustable dividers for optimal storage. Heavy duty zippers and adjustable straps provide extra security, while an external card or ID holder and internal clear view pocket provide clear storage. Made from 600D Polyester with PVC materials, this bag ensures maximum durability. It has a transparent pocket in the inner flap, designed to easily find and organize different materials, thanks to the elastic rubber- bands that guarantee a proper fastening.It also has five external pockets, two side pockets, one on the back and one on the top which is diaphanous, and a frontal pocket that can be divided thanks to the pockets and rubber bands. Features Tarpaulin made base (waterproof material) High resistance zips Night & day reflecting strips Washable material Reinforced handles and shoulder straps External card holder External top transparent pocket to keep a list of items

Compact and light in weight for easy carrying. The MED-TAC 6-in-1 Tactical Trauma Shears is an affordable, expertly designed EMS/Rescue shear with 6 essential tools and built to last with durable, fluoride-coated non-stick surfaces and high-impact handles. Featuring stainless steel blades with milled serrations to cut even the toughest materials, an oxygen tank wrench, a strap cutter, a ring cutter, a ruler, and a carbide glass breaker, this powerful tool provides the ultimate emergency situations preparedness.  Made from 5cr13 stainless steel and measuring 5.7" x 2.16" folded.

Note:  This is an empty bag, no contents included. The Tasmanian Tiger Medic Hip Bag is an ergonomic medical equipment carrying solution that offers intelligent compartments to house medical supplies. The lid lifts for easy access and comes with a scissors pouch. Equipped with MOLLE hook-and-loop strips, the side pockets enable modular expansion. The hip belt can be detached to utilize as a shoulder bag. It also includes adapters to attach to a plate carrier. Features: Detachable strap Removable belt Large zip pocket Variable interior compartments Scissors fixation Attachable to vests, hip belts, etc., MOLLE hook Laser cut MOLLE side, and plate carrier adapters. VOLUME 9 Liters | 183 Cubic Inches WEIGHT 30oz | 549g DIMENSIONS 12.5 x 6 x 6.5in | 32 x 16 x 17cm MATERIAL CORDURA® 700 den (Multicam 500 den)

The Squad Kit Bag is a compact, yet high-capacity solution to carry a significant number of medical supplies to treat several casualties. The bag is designed to be kept in a vehicle or be worn in multiple ways (fanny pack, over the shoulder, attachments for 3-day assault packs & MOLLE-style webbing).  It features an Enhanced Hip Stabilization System to prevent squad bag from flipping while being worn on the waist.  The bag also has a contoured profile, with a large central compartment, multiple attachment points & trauma-shear storage at front.  Features: Rapid access and organization is enhanced by elastic storage loops that keep items in place until needed 500D CORDURA® Solution-Dyed Nylon with built in Near Infrared Signature Reduction Sand and water resistant zippers with silent pulls PALS/MOLLE-style attachment system Dimensions: BAG ONLY: H 7.75 in. x W 13 in. x D 9 in. Weight empty: 1.36 lb

 IV Cell with Protective Case to Keep IV Therapies Protected and Organized The G3+ Intravenous Cell organizes and protects all your IV therapies for quick and easy access. The Intravenous Cell is one of four in the CELL family (Medicine, IV, Airway and Universal) in the StatPacks third generation cellular system. All cells are specifically designed to fit into any of the StatPacks G3+ and G4 EMS packs: G3+ Perfusion, G3+ Backup, G3+ Load N Go, G3+ Clinician, G3+ Quicklook, G3+ Breather, G3+ Responder, and both the small and large new G4 Retro.The Intravenous Cell also fits into most EMT Jump Bags available in the market today.*Case Only, Pictured Tools and Equipment are NOT Included*G3+ cells and kits are all backward compatible with previous G3 model packsG3+ IV Cell Construction: This IV cell is highly protected, well-organized, and easily accessible.The unique semi-rigid, foam-molded design keeps all your emergency medical equipment inside protected from breakage or the elements.The main compartment is opened using the full-length zippers, which have large silicone rings attached to the ends of them to make zipping and unzipping quick and easy.The top lays down and has multiple storage compartments.The main storage compartment is also organized with multiple storage compartments to enable superior organization.The main compartment provides an area to place a pressure gauge for rapid fluid infusion or high-altitude fluid therapy. You can use hot or cold packs in the G3+ Intravenous Cell IV cell hot/cold therapy pocket to warm or cool fluid(s).A clear mesh window is provided on the side of the bag to easily identify your IV cell.Two grab handles are provided to make it easy to grab and go. On one handle is printed “INTRAVENOUS” to quickly identify the G3+ Intravenous Cell from your other EMT gear.The IV cell is color-coded for easy identification from other EMT equipment.An ID window, made with durable mesh, allows you to label the bag any way you want to identify between other medic bags.The material used on this IV bag is highly strong, durable, and abrasion-resistant. You can use and abuse your G3+ Intravenous Cell without every worrying about the case or contents getting damaged.This is the IV cell that will give you exactly what you need and last you forever with no hassle.

IV Kit that Keeps IV Therapies Organized & At Your Gloved Fingertips The G3+ Circulatory Kit is an IV kit that holds everything you need for a quick IV setup in one convenient module. The foam-lined, foldable design keeps all your drip sets, IV bags, catheters, needles, and start kits neatly arranged for quick and easy access. The G3+ Circulatory Kit is an IV kit that also doubles as a pressure bag for rapid fluid infusion. The IV module makes it easy to share on multi-victim accident scenes. This is a perfect accessory EMS IV kit for any Statpacks main packs or EMS bags on the market today. Case Only, Pictured Medical Drugs and Tools are NOT Included.   Accommodates all IV bag sizes (1 Liter, 500 Milliliter, 250 Milliliter) Specifically designed to stow neatly in Statpacks Generation 3 Emergency Medical Services packs Hot or cold packs may be placed in to warm or cool fluid(s) Keeps IV Start Pack™ ready for use Front and inside pockets organize IV tubing and catheters together with the IV bag Transparent durable urethane window for quick IV bag solution identification Single-buckle closure securely holds contents in place and allows quick, one-handed access Top loop hangs the entire kit with the IV bag solution A quick stash pocket for trash or extra supplies Adjustable cam-lock buckle allows you to pressurize contents for rapid fluid infusion or high-altitude fluid therapy. Color-coded for easy identification of your EMS IV kit. Cutting-Edge Fabric Technology for Our IV Kit We use a state-of-the-art, high-performance elastomer as the material for our IV kits. we use on our IV kits is the most advanced material technology available. The most advanced material technology on the market, it offers a unique combination of mechanical, physical, and chemical properties that qualify it for the most demanding applications. These properties include the following: High Tear Strength: Our material’s high tensile strength means your IV kit will never tear or fall apart on you. Abrasion Resistance: With more than three times the durability of rubber, this material can withstand the harshest physical abuse, including scratching and friction. No matter how much you use your IV kit, it will always look fantastic. Outstanding Flexibility: The dynamic flex performance of our material makes it withstand severe external forces with ease. This includes in extremely cold temperatures. Microbiological Resistance: Our material provides superior resistance to microbiological attacks, a must-have feature for IV kits. Biocompatibility: Our material exhibits superior biocompatibility and is widely-utilized in medical, sanitary, sport, and protective devices. Heat and Weather Resistance: Elastomers are chemically degraded by UV radiation and heat. Our material can be used over a wide range of temperatures and provides superior protection against degradation under severe climates. Resistance to Oils, Chemicals, and Greases: Our material does not react chemically to oil contamination. Weight 0.618 lbs Dimensions 10.25 × 8 × 2 in Color Red

EMS Airway Bag with Semi-Rigid, Quad-Fold Design The G3+ Airway Cell EMS airway bag organizes and protects advanced airway adjuncts. Neatly arrange your intubation, laryngoscope blades, oral pharyngeal airways, and nasal pharyngeal airways for fast access. The Airway Cell is one of four in the CELL family (Medicine, IV, Airway and Universal) in the StatPacks third generation cellular system.  All cells are specifically designed to fit into any of the StatPacks G3+ and G4 EMS packs: G3+ Perfusion, G3+ Backup, G3+ Load N Go, G3+ Clinician, G3+ Quicklook, G3+ Breather, G3+ Responder, and both the small and large new G4 Retro.The Airway Cell also fits into most EMT Jump Bags available in the market today.*Case Only, Pictured Medical Drugs and Tools are NOT Included*G3+ cells and kits are all backward compatible with previous G3 model packsThis cell makes for a quick, easy to use, EMS airway bag or EMT intubation bag.The unique semi-rigid, foam-molded design keeps all your emergency medical equipment inside protected from breakage or the elements. The quad-fold design allows you to organize your EMS airway bag equipment for quick and easy access.The main compartment is opened using the full-length zippers, which have large silicone rings attached to the ends of them to make zipping and unzipping quick and easy. The top, which doubles as a smaller compartment, then folds down flat.Once the main compartment is opened, the other compartments fold out, while remaining attached to the main case.When fully laid out, the EMS airway bag displays all your intubation equipment. This makes it very easy to locate and grab, especially in high-stress situations.Each of the four compartments is organized with mesh pockets and elastic band strips to give you limitless organization options.Two grab handles are provided to make it easy to grab and go. On each handle is printed “AIRWAY” to quickly identify it from your other EMT gear.The Airway Cell EMS airway bag is color-coded for easy identification from other EMT intubation equipment.A durable transparent urethane ID window is provided to allow you to label the bag any way you want to identify between other medic bags.The material used on this EMS airway bag is highly strong, durable, and abrasion resistant. The Airway Cell can take a lot of use and abuse, and you never have to worry about either the case or contents getting damaged.  Weight 1.782 lbs Dimensions 6 × 7 × 12 in Color Green

The Heat Reflective Shell - Insulated™ (HRS-I™), a rugged outer shell is constructed of a 5-ply composite fabric with a protected non-conductive reflective layer and NEW insulation layer that provides additional thermal retention. Rapid 360° access to the casualty with minimal exposure to the elements is achieved through the use of 1.5 in. continuous hook and loop closures located along the perimeter of the covering.   The HRS-I™ also features an INSULATED top-to-bottom tapered shape to maximize isothermal capabilities. The heat-generating source of the HPMK-I™ is a self-heating, oxygen- activated 4-Cell Ready Heat blanket designed to sustain up to 10 hours of continuous dry heat (no external power supply required). This low cube kit is vacuum packaged in a rugged, pliable pouch featuring NAR’s Red Tip Technology® with tabs that allow easy access and rapid deployment.   The new top & bottom insulation layers exceed the insulation value of the Army Module Sleep System Patrol Bag. This insulation is highly compressible but also has excellent rebound after opening. The added insulation is also hydrophobic and will not retain fluids or additional liquid weight. Dimensions: Packaged: H 11.25 in. x W 9 in. x D 4.25 in. Size: L 78 in. x W 43 in. Weight: 2.81 lbs.  

The reinforced Heat Reflective Shell (HRS™) from North American Rescue® is a strong, flexible, lightweight covering designed to completely encapsulate the patient during casualty care. Consisting of a 4-ply composite fabric with a non-conductive reflective layer, the HRS™ provides superior thermal insulation and can support up to 250+ lb. using 1.5 in. continuous Velcro® closures, offering swift 360° access to the casualty with minimal environmental exposure. The HRS™ has a built-in hood, integrated fluid absorption pad and top-to-bottom tapered shape to maximize isothermal capabilities. Dimensions: Packaged: H 10 in. x W 6.75 in. x D 2.5 in. Size: L 78 in. x W 43 in. Weight: 1 lb. 13 oz Vacuum-packed for small cube footprint

RTS Tactical Level III+ Lightweight Armor is capable of stopping multiple rifle rounds as per NIJ 0101.06 III - up to powerful 7.62x51 (M80) Our Level III+ Steel Backpack Body Armor is the ideal choice for those seeking unbeatable protection and comfort. Specifically tailored to fulfill the needs of travelers, professionals, and students in urban environments, the backpack insert provides an extra shield in any situation. As the only providers of Level III+ backpack defense, we are proud to offer the highest caliber of protection against rifle-caliber ammunition. This unrivaled level of safeguarding affords optimal security. Our armor plates are proudly manufactured in-house in the USA, adhering to stringent quality standards and rigorous testing protocols. Our Level 3+ Steel Backpack Body Armor passes the National Institute of Justice's (NIJ) criteria for safety and durability with flying colors. The NIJ is the United States' leading standard-setter when it comes to body armor, and we manufacture our armor plates to meet those same standards. That means you can trust that our armor provides superior protection from high-velocity rifle rounds. Its superior shielding capability is tested to the highest standards, guaranteeing your peace of mind. Our armor plates are further fortified with a high-performance polyurea coating, utilizing cutting-edge technology for enhanced safety features and superior protection against spalling. Size & Weight • 10 x 12 - 6.7 lbs. • 11 x 14 - 8.8 lbs • 11 x 16.5 - 10.1 lbs.

This Combat Tourniquet Holster is specifically designed to fit the Gen 7 CAT tourniquet and other combat TQs. The rear straps allow for an easy and reliable attachment to any MOLLE platform. The holder's adjustable height and customizable mounting positions enable it to be mounted both horizontally and vertically. Its longer rear straps even accommodate duty belts up to 3" wide.  The Rigid Tourniquet Holder offers essential protection for first responders and public safety personnel. Its secure and adjustable design accommodates the Gen 7 C-A-T combat tourniquet for fast deployment in an emergency. Mount it vertically, horizontally, or at a right or left angle, and adjust its height to suit your unique needs. Injection molded to fit the tourniquet perfectly, no straps, flaps, or buckles are needed. Keep your tourniquet near in an emergency with this reliable holder.

When you add Norton Shopping Guarantee to your cart during checkout, you will receive Identity Theft Protection, a Purchase Guarantee, and a Low Price Guarantee.Norton Shopping Guarantee is the ultimate solution to shop with confidence on your favorite online stores.Learn more about Norton Shopping Guarantee with Package Protection.

Protect your purchase from lost, damaged, or stolen shipments.We want to provide you peace of mind for your shipments, with integrity and sympathy towards every claim.Learn more about Norton Shopping Guarantee with Package Protection.

Protect your purchase from lost, damaged, or stolen shipments, and enjoy 30 days of coverage from Norton Shopping Guarantee.When you add Norton Shopping Guarantee to your cart during checkout, you will receive our full suite of benefits including Package Protection by EasyPost, Identity Theft Protection, a Purchase Guarantee, and a Low Price Guarantee.Norton Shopping Guarantee with Package Protection is the ultimate solution to shop with confidence on your favorite online stores, with all around protection from purchase to delivery. Our service is designed to protect you from fraud, identity theft, and shipping damage, ensuring that every purchase you make is secure and hassle-free.Learn more about Norton Shopping Guarantee with Package Protection.

  Our new Laser Cut Plate Carrier is an extremely affordable entry to the plate carrier market.  Within its kangaroo pouch, it holds a removable triple pouch designed to carry 2 AR mags and 1 tourniquet, making it an excellent option for personal defense or rapid response. It's front and rear bags can carry most 11x14" plates currently found on the market.   Features: Laser cut MOLLE slots for a sleek low-profile look. Low profile drag handle Soft side hook and loop on both front and rear panels for patches and/or name tapes Padded shoulder straps Dimensions : 14.5”L X 11.5”W X 3”D

The Tasmanian Tiger IFAK Pouch Dual is the perfect tool for your medical needs as a tactical operator. Crafted from laminated CORDURA® material, it is designed to be used with up to 50mm belts and includes adjustable fixation options for medical equipment. Both sides come with removable, individually configurable panels and back-to-back hook & loop strips for individual fastening inside. Fold open with hook and loop fastening, and mount on MOLLE surfaces or your belt with four MOLLE loops. WEIGHT 5.64 oz/160g DIMENSIONS 4.33H x 7.87W x 1.38Din /11x20x3.5cm MATERIAL CORDURA® 700 Denier

The RTS Tactical RICO Special Operations Vest with FX770 Level IIIA Soft Armor is the best in its class and provides the utmost protection for Special Operations, SWAT, Entry Teams, and Tactical Operations. Featuring a unique 4-point QR buckle system that allows fast donning and doffing while providing a side loading plate design to easily reduce weight. This vest also comes with a full 360 Laser Cut Load Bearing MOLLE platform, as well as SAPI Plates (front, back, and side) along with hard armor compatible inserts such as 6x8 side plates - making it flexible for mission specific configurations of pouches and accessories. The full soft armor coverage overlapping design provides an added layer of security while being Cummerbund soft armor compatible. For added comfort, this vest boasts an industry-leading spacer mesh backing that allows wearers to use their plate carrier for extended periods without discomfort. Furthermore, upgraded shoulder support ensures extra stability regardless of the user’s environment or surroundings. Additionally, this vest is compatible with RTS Tactical Interchangeable front load out flaps and configurations to further customize your gear for any given mission. RTS Tactical’s FX770 NIJ 0101.06 Level IIIA Armor Weighs in at 1.42lbs Per Sq Foot and Leads the Industry for Light Weight Armor Options at Our Price Point. It is 100% USA Made Armor with Dupont Kevlar™, And Constructed, Sewn Sealed and Goes Through Strict Quality Control in Miami Florida. This vest also features a roomy chest pocket for full sized iPhones, pens, or critical documents, as well as a built-in full size cell phone pouch under the cummerbund. To top it off there are removable Epic Shoulder Pads designed to provide maximum comfort during long operations; not to mention compatibility with multiple RTS Tactical Soft Armor and Hard Armor Packages – making this tactical soft armor vest the ultimate choice when it comes to elite protection in dangerous situations. FEATURES: 4-point QR buckle system for fast donning and doffing. Unique side loading plate design for easy reduction of weight in the field. Full 360 Laser Cut Load Bearing MOLLE platform for Mission specific configuration of pouches and accessories. SAPI Plates front, back, and side Hard Armor compatible:  - S, 8”x10” front and back inserts - M 10”x12” front and back inserts - L 10”x12” front and back inserts - XL 11”x14” front and back inserts - 2XL 11”x14” front and back inserts  All sizes are compatible with 6X8 side plate inserts. Full soft armor coverage overlapping design as well as Cummerbund soft armor compatible. Best in the industry Spacer mesh allows you to wear your plate carrier for long periods of time without discomfort. Upgraded shoulder support. Compatible with RTS Tactical Interchangeable front load out flaps and configurations. Roomy chest pocket for full sized iPhone, pens and critical documents. Built-in Full-size cell phone pouch under the cummerbund. Removable Epic Shoulder Pads Compatible with multiple RTS Tactical Soft Armor and Hard Armor Package  

This pack is sold empty, any medical supplies are for display purposes only.   The 3 Day Assault/Medic Pack is a unique amalgamation of roles we wanted a 3-day pack to encompass. Whether your objective is to cause injury or aid the injured, the 3DAMP has enough organization on the inside to keep all your supplies at the ready. The interior main compartment is lined with loop so the 3 removable zippered vinyl pouches can be pulled off and brought directly into the action of the immediate moment. The clear vinyl construction grants transparency into the contents, allowing the user to easily see what group of supplies is contained. This allows the wearer to customize each pouch into kits... like bleed and airway kits, to ammunition and cleaning tools... hell even hygiene supplies and diapers/wipes and ointments. The main compartment also features a beavertail divider with MOLLE webbing, a loop panel, and a pair of elastic retention loops for tourniquets and other items that must be quickly retrievable. On the other side of the divider are 4 vinyl zipper pouches for even more storage of organized supplies like bandages, tape, cordage, medications, and other like items. Moving towards the front of the back, the next compartment features bladder hanger for water or IV that also makes for a great tablet sleeve. There are channels in the bottom corners to feed drinking or IV tubes out the bottom front of the bag. The front wall of this area also has a pouch with an elastic mouth to keep lose items secure, and a row of elastic and a keychain keeper for retaining other essentials within easy reach. The front most zippered compartment is smaller but still packed with pockets: a rear stash pocket with a built-in zippered pocket, followed by a 60/40 elastic mesh pocket, and another open pocket with an elastic mouth. There is also a discreet front pocket on the exterior as well that is large enough for a wallet, smart phone, charger, or other essentials. The exterior of the 3DAMP boasts supporting features for both medical and tactical roles. Shock cordage on the top of the front face is great for rapid retention of rolled up items like a light jacket or blanket. The bottom has MOLLE webbing to attach various pouches if needed. In addition to hanging loops so that bag can be suspended, the top of the bag has a carry handle, allowing the clamshell format of the zipper to fully open so the entire main compartment can be accessed quickly and efficiently. The back padding is ribbed airmesh for optimum comfort. The left and right sides feature compression straps for keeping the bag condensed when fully loaded. Both shoulder straps have multiple elastic retention straps for securing hydration bladders to either side. Whether you are an EMT, first responder, search and rescue, or just a well-prepared parent, the 3DAMP is equipped to handle the mission ahead of you.

(This video references the standard tarpaulin version but allows you to see all the features of the bag.) The Elite Bags Critical's Infection Control ALS Bag is the ultimate first responder bag for infection control. It's made with high quality tarpaulin materials, designed to resist water, body fluids, and liquids. It converts easily from a duffle bag to a backpack and comes with a two-year warranty. Clean it quickly with disinfecting wipes and enjoy the durability and affordability of this infection control bag. Infection control series of bags are designed to be wiped clean using regularly available disinfecting wipes. Please note, using acid-based cleaners or heavy detergents may damage the tarpaulin finish voiding manufacturer warranty. Affordable. Adaptable. Durable. Expandable. Easily Converts from Duffle to Backpack High Visibility Materials High Visibility Easy Grip Zippers 1000D Polyamide Clipboard Included Adjustable Straps Oversized Internal Compartment w/Adjustable Dividers Top, Side, and Front Zipper Compartments HD Fixed Grab Handles Reinforced Bottom w/Composite Skid Rails Detachable Padded Shoulder Straps Concealable Waist Straps Glow-In-The-Dark Pull Strings Removable Name Tape and Logo Soft Padded Quick Grip Handles Expandable Storage Pockets Water-resistant, Wipe Clean Materials Tarpaulin Infection Control Materials HD Metal YKK Zippers Large Side Pockets w/Clear View Pouches Modules Included (Velcro Backing) Five Detachable Colored Modules One Isothermal Ampoule Holder Oxygen Cylinder Compatible w/Pass-through Oxygen Cylinder Adjustable Straps Dimensions (approx.) 13.78" × 24" × 11.6" Capacity (Liters) (approx.) 62.98  

The Tasmanian Tiger Medic MASCAL (Mass Casualty) Pack is a first aid treatment pack that is optimized for simultaneous initial treatment of multiple wounded persons when individual treatment is not immediately possible. Created for the Active Threat Medic (ATM), the TT Medic MASCAL (Mass Casualty) Pack enables simultaneous initial first aid treatment of multiple injured individuals in urgent scenarios. The front of the bag includes four IFAK pockets for rapid access and the inside is arranged for stocking of materials needed for emergency operations with many casualties. One of the key features of the TT Medic MASCAL Pack is its practical and efficient design. The front of the backpack is equipped with four Individual First Aid Kit (IFAK) pouches, allowing for quick and easy access to essential supplies. The interior layout is strategically organized to accommodate a large stock of medical supplies for emergency operations involving mass casualties (the pack does not come equipped with medical supplies). Additionally, the sides of the pack are equipped with MOLLE in a laser-cut design, providing ample space for attaching additional gear or accessories. The pack comes with a handle for easy transport and includes a scissor bag for added convenience. We understand the critical role that Active Threat Medics play in providing immediate medical care in high-stress situations. The TT Medic MASCAL Pack is designed to support their needs and provide them with a reliable and efficient tool for saving lives.The MASCAL pack, as sold here, is not equipped with medical supplies.  Custom kit loadouts are available.  Contact us for details. FEATURES: MOLLE sides - laser cut 4 IFAK pouches Equipped with handle Includes scissor bag Weighs 4.06 lbs. Measures 18.11 H x 11.02 W x 3.94 D (46H x 28W x 10D cm.) Cordura 700 Denier (Multicam is 500 Denier)

The U.S. Army's Ranger Regiment implemented a Ranger First Responder Program, which was a spinoff from the Tactical Combat Casualty Care (TCCC) program. This program aims to ensure every Ranger is trained and equipped to provide immediate lifesaving care to fellow soldiers in the event of an injury on the battlefield. The training curriculum generally includes lessons on controlling massive hemorrhage, managing airways, treating chest injuries, preventing hypothermia, recognizing and treating shock, and other field-relevant medical skills. The goal of the regiment is to significantly reduce the number of Rangers who die of wounds sustained in combat by simply targeting optimal medical capability in close proximity to the point of wounding. The Ranger Bleeder Control Kit provides the tools needed by Ranger Medics to help prevent potentially lethal wounds sustained in combat. Proven effective in preserving life in the field, this kit includes items that improve response time and execution of advanced trauma management. 'Get the confidence of optimal medical capability with the help of the Ranger Bleeder Control Kit. Ranger Bleeder Control Kit Contents CAT Tourniquet x 2 Celox Rapid x2 OLAES Pressure Dressing Nasopharyngeal Airway 28Fr w/Lubricant Hyfin Chest Seal Twin Pack 10G Needle for Chest Decompression TCCC Card DD For 1380

Be prepared for any emergency with the Trauma and First Aid Kit – Watertight (TFAK-W) from North American Rescue®. This portable, watertight kit comes equipped with essential trauma and first aid supplies in a durable and custom drybag container. It is organized with removeable treatment pouches—perfect for on-the-go care. Plus, it's compatible with belt, shoulder, and waist straps, making it easy to take with you. With this kit, you'll be ready for moderate to severe bleeding and penetrating injuries. Our Tactical First Aid Kit-Wide (TFAK-W) provides all the essential trauma-relief equipment for moderate to severe bleeding and penetrating injuries. Its convenient zipper-accessed mesh pouch, organized by injury/treatment categories, makes it easy to use. The waist or over-the-shoulder straps provide the perfect hands-free, on-the-go option. SPECS Includes bleeding control elements proven to save lives Watertight container Labeled mesh pouches organize the kit supplies Kit Contents: Bleed Bag 1 x C-A-T® Tourniquet (Orange) 2 x NAR® Wound Packing Gauze 1 x 4 in. NAR Responder ETD (Emergency Trauma Dressing) Airway Bag 1 x HyFin® Vent Compact Chest Seal, Twin Pack 1 x Microshield CPR Mask Wound Care Bag 2 x Sterile Eye Pad, Oval 2 x BurnTec® Dressing, 4 in. x 4 in. 2 x Gauze Pad, 5 in. x 9 in. 2 x 4 in. x 4 in. Gauze Pad, 2 pk 1 x Surgical Tape, 1 in. 1 x Eye Wash Solution, 1 oz. Misc. Meds Bag 1 x Survival Blanket 1 x Cold Pack, 6 in. x 9 in. 3 x Safetec Burn Gel 50 x Bandage, 1 in. x 3 in. 5 x Antibiotic Ointment 5 x Antiseptic Towelette Splinting Bag 1 x SAM® Splint II 1 x Elastic Bandage, 4 in. 2 x Triangular Bandage Lid Bag 4 pair x Blue Responder Gloves, Lg 1 x Responder Shears, Lg 5 x Hand Sanitizer 2 x Permanent Marker, Lg 1 x First Aid Pocket Guide 1 x Bleeding Control Instructions 1 x Kit Contents Inventory Card 1 x Class A/B ANSI Inspection Card Dimensions: L 11.5 in. x W 9 in. x H 6.5 in. Weight: 4.5 lbs

***Freight Shipping Required*** This item must be shipped on a pallet. If purchased with a standard shipping method, a Customer Service Representative will contact you with the updated cost of freight for approval and authorization. The North American Rescue Talon® Wheeled Litter Carrier is the lightest wheeled litter cart on the market for single person transport to & from MedEVAC vehicles, aircraft, etc. The Wheeled Litter Carrier has a locking clamp system to keep the litter firmly in place, and it allows for different litter widths. Compatible with Talon, Raven, MedEvac & T3 litters, the Wheeled Litter Carrier also performs as litter stand in the field due to it’s unique wheel locking system. A rugged, stackable storage case with wheels is included with the Wheeled Litter Carrier for easy storage and transport. The Wheeled Litter Carrier is quick and easy to deploy or disassemble for storage. High strength materials allow for a payload of 550 lbs, and rugged, high-strength wheels are suitable for most environments and terrains. The litters are sold separately, this product is the wheeled carrier portion only SPECS: NATO NSN# 6530-01-663-2308 The lightest wheeled litter cart on the market Adjustable for different litter widths Compatible with the Talon®, Raven®, T3 and Medevac litters (sold separately) Also performs as litter stand in the field Easily foldable for transport & storage Dimensions: Deployed: L 56.29 in. x W 27.5 in. x H 36.2 in. Folded: L 42.1 in. x W 27.5 in. x H 9.84 in. Weight: 42 lb (19.05 kg) Payload: 550 lb (250 kg)

Please note that the first aid components are shown for display only and sold separately The Elite Bags Quickaid's Drop Leg First Aid Bag is an affordable, expandable, and durable emergency first aid kit designed with real-world feedback from first responders and emergency personnel. This lightweight and transportable bag is full of features and clever design elements, including MOLLE, belt loops, and exterior accessory attachment points for endless configuration possibilities. Make sure you're always prepared with this emergency solution. Product Quickaid's Large Drop Leg First Aid Bag Features MOLLE, Utility Belt Loops, Interior Pocket w/Drawstring, Velcro Front/Inside Flap, Removable Logo, Glow-In-The-Dark Pull Strings/Reflective Zippers (EB02.031), Adjustable Elastic Equipment Loops (Interior/Exterior), Double Zipper System, Drain Hole Style First Responder Drop Leg Bag Material 1000D Polyamide, HD Metal YKK Zippers, High Visibility Materials (EB02.032), Tactical Black and Coyote Tan Sold As Individual Bag Size 7.9"x8.7"x3.94" Warranty Two Year Warranty Weight 1.21lbs

The Elite IBB's waist bag is perfect for emergency responders and medical professionals. Lightweight and adjustable, it provides easy access to trauma, accident and first aid materials, securely held within multiple pockets and compartments. Featuring a removable fold-over cover with high vis banding, contents are kept secure and protected, this medical bag has a protective removable flap to help restrain and compress contents, plus a detachable waist belt with adjustable buckle for added support. It also has hi-vis reflective trim for night and day visibility, multiple pockets and elasticated support straps for secure storage, and tough padding for durability. An easy-opening top and edge zip allows for full access to the compartment and adjustable hook & loop dividers for organization. Weight (approx) 0,3 kg Dimensions (approx) 20 × 16 × 4 cm Material 1000D POLYESTER Color RED Capacity (Liters) (approx) 1.28 Recommended maximum content (Kg) 1.50

The FTIM-6X9 (Fast Totally Integrated Maximizer™) is a hybrid organizer that combines the best features from your PPM/EDCM organizers and FATPack medical pouches, providing quick access and efficient organization for your everyday carry (EDC) supplies. A sturdy grab handle with FASTab closure, YKK zipper and SPARTAN zipper pulls enable fast pull-down opening. With Maximizer-style staggered/offset elastic loops, AnchorWraps, slip pockets, and paracord loops, everything is designed to secure your everyday supplies and maximize space. Front slip pocket for easier access, along with a loop field for ID/Morale patches. MOLLE compatible for modular attachment. We enhanced the zipper function to be as smooth as possible, includes two Spartan Zipper Pulls, redesigned the front slip pocket to be easier to access and updated the front hook and loop field to seamlessly flow with the bag. The back MOLLE attachment now uses less nylon webbing for weight savings without losing any compatibility to MOLLE/PALS webbing. With maximizer staggered/offset elastic loops, 2 included anchor wraps, two internal large slip pockets, two 1” paracord attachment loops with keeper, and 29 vertical and horizontal elastic loops, every slot/pocket in the FTIM is designed to keep every piece of everyday carry (EDC) gear the perfect spot! The main compartment bottom shelf also helps retain small gear and prevents accidental drops. A sturdy grab handle and user selectable FASTab system lets you quickly unzip the #8 YKK lockable zippers. With one instinctive pull, the FTIM's contents are at the ready. Loop ID panel, exterior slip pocket, and MOLLE/PALS side panels allow expansion of gear carried. You can attach the pouch onto any MOLLE/PALS surface with MOLLE Sticks (#99MS5X4*); or convert it for hook-and-loop attachment using the MOHL-Air adapter panel (#017700*); or use our 1" UNIVERSAL STRAP (#012001*) to carry it around your shoulder. Features: ● One external and two internal storage pockets with 29 elastic webbing slots for organization.● Maximizer-style staggered and off-set stitching on elastic webbing to increase usable space.● Gear shelf bottom to support vertical items.● Grab handle with FASTab™ closure for easy hand carry and opening.● Internal keychain fob and paracord attachment loop.● 1.75” (H) x 3” (W) ID/Morale patch loop panel on the front.● MOLLE/PALS webbing on sides/rear for modular attachment, compatible with MOLLE Sticks, or MOHL-Air Adapter Panel. Materials: ● 500-D Military-grade Cordura nylon 66 with DWR coating (Durable Water Repellent).● 210-D Ripstop nylon with DWR coating (Durable Water Repellent). Hi-visibility, lightweight & water resistant.● Durable YKK RC-Class lockable zippers (non-reversed).● High tensile strength nylon webbing and tape.● Strong stitching with high tensile strength bonded nylon thread. Bartack and Box-and-X stitching for strength & durability.

The re-designed Fast Totally Integrated Maximizer™ FTIM-5X7 (Gen-2) is an evolved organizer that offers lightning-fast pull-down access and gear-taming organization. It is a hybrid of our signature PPM/EDCM Maximizer™ organizers, and the popular FATPack medical pouches. We enhanced the zipper function to be as smooth as possible, includes two Spartan Zipper Pulls, redesigned the front slip pocket to be easier to access and updated the front hook and loop field to seamlessly flow with the bag. The back MOLLE attachment now uses less nylon webbing for weight savings without losing any compatibility to MOLLE/PALS webbing. With maximizer staggered/offset elastic loops, 2 included anchor wraps, two internal large slip pockets, two 1” paracord attachment loops with keeper, and 24 vertical and horizontal elastic loops, every slot/pocket in the FTIM is designed to keep every piece of everyday carry (EDC) gear the perfect spot! The main compartment bottom shelf also helps retain small gear and prevents accidental drops. A sturdy grab handle and user selectable FASTab system lets you quickly unzip the #8 YKK lockable zippers. With one instinctive pull, the FTIM's contents are at the ready. Loop ID panel, exterior slip pocket, and MOLLE/PALS side panels allow expansion of gear carried. You can attach the pouch onto any MOLLE/PALS surface with MOLLE Sticks (#99MS5X4*); or convert it for hook-and-loop attachment using the MOHL-Air adapter panel (#017700*); or use our 1" UNIVERSAL STRAP (#012001*) to carry it around your shoulder. Features: ● One external and two internal storage pockets with 29 elastic webbing slots for organization.● Maximizer-style staggered and off-set stitching on elastic webbing to increase usable space.● Gear shelf bottom to support vertical items.● Grab handle with FASTab™ closure for easy hand carry and opening.● Internal keychain fob and paracord attachment loop.● 1.75” (H) x 3” (W) ID/Morale patch loop panel on the front.● MOLLE/PALS webbing on sides/rear for modular attachment, compatible with MOLLE Sticks, or MOHL-Air Adapter Panel. Materials: ● 500-D Military-grade Cordura nylon 66 with DWR coating (Durable Water Repellent).● 210-D Ripstop nylon with DWR coating (Durable Water Repellent). Hi-visibility, lightweight & water resistant.● Durable YKK RC-Class lockable zippers (non-reversed).● High tensile strength nylon webbing and tape.● Strong stitching with high tensile strength bonded nylon thread. Bartack and Box-and-X stitching for strength & durability.

Carry your medical supplies with ease and confidence. in The Tasmanian Tiger Base Medic Pouch This medic pouch is an essential tool for first responders, providing essential first aid supplies in an organized and accessible package. This MOLLE-compatible rescue bag features an internal mesh bag with drawcord, scissor pouch, detachable hook & loop pockets, and a full MOLLE snap button system for secure attachment to vests or other packs.  WEIGHT 10.56oz/300g DIMENSIONS 8H x 5.5W x 12D / 20x14x12cm MATERIAL CORDURA® 700 denier (Multicam 500 denier)

The Tasmanian Tiger Medic Transporter is a mobile solution consisting of a trauma pouch panel system which provides a significant equipment carry platform to complement the TT Medic backpack and bag range. The durable rubberized handles on both sides and extra-wide handles and shoulder straps help to optimize the portability of the panel. A strong No.10 zipper and the padded bottom make the panel a strong and robust help in any emergency. Additional equipment can be secured by various attachments. A MOLLE Velcro adapter helps to secure Velcro pouches (e.g. TT Rescue Pouch). The panel divides into four small panels, of which the transparent pouches are all detachable and can be interchanged. Some of the transparent pouches have two compartments and various loops. The panels have attachments to secure to tents, vehicles etc. Large long pockets on the backs of panels round out the capabilities of this high-capacity Medic Transporter system.Pouches included: 1x Dump Pouch 13x9.84x1.27in/ 33x25x4cm 3.35oz/95g, Material: 420HD Nylon 3x Transparent Pouches with zip compartments 9x4.7x5.12in/23x12x13cm 7.23oz/205g Material: CORDURA® 700 Denier / 420 HD Nylon 5x Transparent Pouches 9x4.7x4.7in/23x12x12cm 5.82oz/165g Material: CORDURA® 700 Denier / 420 HD Nylon Labels include: 2 x BREATHING 2 x BLEEDING 2 x AIRWAY 2 x IV/IO 1 x MEDICATION, 1 x HYPOTHERMIA The TT Medic Transporter does not include medical supplies. FEATURES: Four durable handles, with robust No. 10 Zipper 3 MOLLE hook & loop adapters to secure hook & loop pouches. Large panel divides into 4 small panels. The transparent pouches are all detachable and can be interchanged. Some transparent pouches with two compartments and various loops The large, long pockets on backs of panels all have attachments to secure.

This is an empty bag only, product images are shown for reference. The Mini Medic Bag is a compact trauma aid bag designed to provide various capabilities for different mission profiles. External pouches and side/bottom MOLLE allow for external tourniquet or other attachment options. Large pouch on back panel includes a drop-down pouch with abrasive resistant padded bottom allows storage of compact breaching tools (not included). External expansion zipper allows for increased load capacity if needed. The inside of the bag has two small and one large, clear tear-away pouches for medical or other equipment supply storage. Along with two mesh inner pouches and an internal pouch on the inner lid, many storage options exist. SPECIFICATIONS: Compact, multi-purpose trauma aid bag with vital medical equipment for point of wounding treatment of multiple injuries Two external pockets with two external tourniquet holders One external pouch with an additional drop-down pouch for use with breaching tools or storage for a hydration pack Expansion zipper to increase load capacity. External MOLLE on sides and bottom of bag / Internal MOLLE rows on the inside back of the bag Three clear tear-away pouches on the inside main compartment Two internal mesh pouches and one larger internal pouch on inner lid Internal tape roll strap DIMENSIONS: H 14 in. x W 11 in. x D 5 in. (Depth expandable to 7.25 in.) Weight: 3 lb.

Building on the success of the CoTCCC recommended HPMK®, the new patent-pending HPMK-I™ (Insulated) with reinforced Heat Reflective Shell - Insulated™ is strong, flexible, lightweight & impervious to wind & rain, now fully insulated to meet new CoTCCC guidelines.   The HRS-I™, the kit’s ruggedized outer shell, is constructed of a 5-ply, composite fabric with a protected non-conductive reflective layer and NEW insulation layer that provides additional excellent thermal retention. Rapid 360° access to the casualty with minimal exposure to the elements is achieved through the use of 1.5 in. continuous hook and loop closures located along the perimeter of the covering.   The HRS-I™ also features an INSULATED top-to-bottom tapered shape to maximize isothermal capabilities. The heat-generating source of the HPMK-I™ is a self-heating, oxygen- activated 4-Cell Ready Heat blanket designed to sustain up to 10 hours of continuous dry heat (no external power supply required). This low cube kit is vacuum packaged in a rugged, pliable pouch featuring NAR’s Red Tip Technology® with tabs that allow easy access and rapid deployment.   The new top & bottom insulation layers exceed the insulation value of the Army Module Sleep System Patrol Bag. This insulation is highly compressible but also has excellent rebound after opening. The added insulation is also hydrophobic and will not retain fluids or additional liquid weight.   Kit Contents: 1 x Heat Reflective Shell-Insulated (HRS-I™) with built-in hood 1 x Ready Heat 4 Cell Blanket 1x Plastic Vacuum Bag Dimensions: Packaged - H 8 in. x W 11 in. x D 6 in. Weight: 4 lbs 14 oz Heat Reflective Shell-Insulated™ (HRS-I™) (Open): L 78 in. x W 43 in.  

The MED-TAC Intl. Decompression Needle is a rugged needle/catheter combo used for the immediate management of a tension pneumothorax.  The high-quality stainless-steel needle measures an optimal 3.25" and has a 14-gauge measurement. The unit comes securely encased in an easy-open protective tube with a textured twist top and handy clip.

The VISM ballistic helmet is designed to protect against handgun shots, 9mm bullets and 357 Sig rounds. It is made with an ergonomic design that fits easily and has an adjustable internal harness and OCC-DIAL belt for a comfortable fit. The external rail provides for the attachment of additional equipment. The internal cushion is made of memory foam and creates an impact buffer, as well as being breathable.  The high cut of the helmet is designed to fit noise-cancelling headsets and other communication equipment easily inside the helmet. The helmet is available in three sizes: Medium heads (21.2” – 22.8”) Large heads (22” – 23.6”) Extra large heads (22.5” – 24.4”) Dimensions are 7.75”H x 11”W x 8.75”D, and it weights 54.4 oz

Our new Laser Cut Plate Carrier is an extremely affordable entry to the plate carrier market.  Within it's kangaroo pouch, it holds a removable triple pouch designed to carry 2 AR mags and 1 tourniquet, making it an excellent option for personal defense or rapid response. It's front and rear bags can carry most 10"x12" plates currently found on the market.   Features: Laser cut MOLLE slots for a sleek low profile look. Low profile drag handle Soft side hook and loop on both front and rear panels for patches and/or name tapes Padded shoulder straps Dimensions : 12.5”L X 10.5”W X 3”D

  The MightySat ™ Rx Fingertip Pulse Oximeter measures SpO2, PR, Pi, and PVi with its at-a-glance high resolution display. Its flexible finger pad enables secure application and minimizes external interference. The touch pad has a high resolution display with a rotating and adjustable color screen for clear display of all measurements. The MightySat ™ Rx offers a unique solution to point of care treatment and initial patient diagnostics. Features: High Resolution Display Signal I.Q.® provides measurement confidence of SpO2 Real time graphical display of patient’s Pleth Waveform Touchpad Allows for Easy Access of Settings and Features Optional Bluetooth LE Capability Flexible Finger Pad Durable and Lightweight Design Specs: Weight: 0.16 lbs. 2.9” x 1.6” x 1.2” Operates with 2 (1.5) volt AAA batteries. Battery life of approx. 1800 spot checks Operating Temperature: 41-104F Storage Temperature: -40 to 158F Operating Humidity 10 to 95%, non-condensing Featuring Masimo SET® Measure-through Motion and Low Perfusion™ Pulse Oximetry Masimo SET® – The Choice of Leading Hospitals Worldwide Masimo SET® overcomes the challenges of low perfusion and motion artifact that limit conventional pulse oximetry Masimo SET® pulse oximetry helps clinicians monitor more than 200 million patients a year1 Respiration Rate from the Pleth (RRp®) RRp may be used to measure respiration rate in the clinic, during emergency medical services, and at home. RRp provides a wide measurement range of 4 to 70 breaths per minute.   UUnique parameters and indicators: Signal IQ® (SIQ)Located under the plethysmographic waveform. The height of the vertical line provides an assessment of the confidence in the SpO2 value displayed. Plethysmographic (Pleth) WaveformReal-time graphical representation of changes in volume of arterial blood with each pulse. Perfusion Index (Pi)A measure of the dynamic changes in the perfusion index (Pi) that occur during the respiratory cycle. Pleth Variability Index (PVi)The ratio of the pulsatile blood flow to the non-pulsatile blood in peripheral tissue used to measure peripheral perfusion. Respiration Rate from the Pleth (RRp)A measure of respiration rate based on changes in the plethysmographic waveform. The unit of measure is respiration per minute (RPM).

The Bard-Parker Safety Scalpel from Aspen Surgical is a high-quality scalpel that offers a unique combination of top-tier performance and specialized safety features. The scalpel is designed to accommodate effective, controlled surgical cutting for use in a wide range of surgical procedures.To ensure the safety of surgeons and medical staff, the blade features a protective, pierce-resistant cover that remains on the scalpel during assembly and disposal. This cover protects against accidental contact with the blade to ensure safety throughout the process of using the scalpel. This inventively designed scalpel provides top-tier tissue separation while also featuring a specialized safety cover to protect against accidental contact. High-quality scalpel offers top-tier tissue separation. Protective cover prevents accidental contact with the blade. Ensures OSHA compliance in surgical environments. Sterile packaging for safety and OR usability Available in blade sizes of 10, 11, or 15

The Genuine product from PerSys Medical! The Trauma / Amputation / Compression Bandage is designed to treat abdominal wounds as well as large wounds, including eviscerations, burns or amputations. It has 12 x 12” sterile bandage pad that aids in the treatment of wounds. The multi-functional bandage also features a stop-n-go release, a sleeve for self-application, and is double vacuum-sealed to ensure integrity and sterility. FEATURES Multi-functional 8” large area wound bandage Large sterile pad Elasticized wrapping leader for compression and security Closure bar Compact, waterproof, vacuum-sealed, flat packaging 8-year shelf life